I am getting my curing fridge setup this holiday.
Right now I am just going for dialing in the temperature control, humidity will be next.
Question:
I have the InkBird ITC-308 temperature controller, the control logic has a heating differential setting and cooling differential setting. What do you guys set those temperature diffs at?
What is an acceptable low and high range for dry curing Coppa, Pancetta, sausage?
Right now I have it set at 3F differential for both heating and cooling and it is doing really well (within 3-5F high/low), I guess that is good?? I am not quite sure how much cycling of my fridge is OK?
After I get the temp dialed I am going for humidity control (probably today sometime) My RH controller is a AGPtek[emoji]174[/emoji] WH8040.
I also have a speed control on my fan, I am going to timer control it to run once or twice a day for 15mins or so (to prevent case hardening)
How often should the fan run? Daily? Twice daily? and how long?
Thanks for feedback/suggestions.
More to come.
InkBird ITC-308 temperature controller settings
This is the Humidity controller an AGPtek[emoji]174[/emoji] WH8040.
Right now I am just going for dialing in the temperature control, humidity will be next.
Question:
I have the InkBird ITC-308 temperature controller, the control logic has a heating differential setting and cooling differential setting. What do you guys set those temperature diffs at?
What is an acceptable low and high range for dry curing Coppa, Pancetta, sausage?
Right now I have it set at 3F differential for both heating and cooling and it is doing really well (within 3-5F high/low), I guess that is good?? I am not quite sure how much cycling of my fridge is OK?
After I get the temp dialed I am going for humidity control (probably today sometime) My RH controller is a AGPtek[emoji]174[/emoji] WH8040.
I also have a speed control on my fan, I am going to timer control it to run once or twice a day for 15mins or so (to prevent case hardening)
How often should the fan run? Daily? Twice daily? and how long?
Thanks for feedback/suggestions.
More to come.
InkBird ITC-308 temperature controller settings
This is the Humidity controller an AGPtek[emoji]174[/emoji] WH8040.
Last edited: