• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

Broken slicer

SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

ifitsdeadsmokeit

Smoking Fanatic
★ Lifetime Premier ★
Joined
Apr 9, 2010
Messages
785
Reaction score
818
Location
Hollister Missouri
Was making some jerky today using @Quiganomics sweet bourbon recipe slightly modified. Went to turn it on and switch broke. Ugh. Initial tasting of marinade is a thumbs up. Ended up cutting it by hand. Was thinking about a bigger slicer recently. It is a blakeslee 8.7” old, that plastic parts brittle old. Anyone ever replace the switch before?

I started looking on FB marketplace, or my better half did since I dont have a login. Found a used bizerba gsp hd33 slicer 13” slicer abt 2 hrs away for $500. It is missing the sharpener and meat anchor so will be another $200. Anyone know anything about these. Sounds like a good deal from the little research I have done. I also have a belly for habanero bacon be ready to smoke in cpl days so trying to avoid borrowing from a friend of my neighbors.
 
Unless you know a pro who can sharpen it, before you buy it check if a new blade is available/cost.

I have a hobart from the forties WITH the sharpener--the sharpener is worth more than the whole (in 100% working order) slicer
 
Blades are available. It is a newer model from what I can ascertain. I would buy the missing sharpener. It is a common commercial slicer.
 
Was making some jerky today using @Quiganomics sweet bourbon recipe slightly modified. Went to turn it on and switch broke. Ugh. Initial tasting of marinade is a thumbs up. Ended up cutting it by hand. Was thinking about a bigger slicer recently. It is a blakeslee 8.7” old, that plastic parts brittle old. Anyone ever replace the switch before?

I started looking on FB marketplace, or my better half did since I dont have a login. Found a used bizerba gsp hd33 slicer 13” slicer abt 2 hrs away for $500. It is missing the sharpener and meat anchor so will be another $200. Anyone know anything about these. Sounds like a good deal from the little research I have done. I also have a belly for habanero bacon be ready to smoke in cpl days so trying to avoid borrowing from a friend of my neighbors.
I’d get it! I don’t have any experience, but they look good quality, and the cheapest used one I found on eBay was a 2018 for over $1900!
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Back
Top
Clicky