• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

Big Block Gas Leak

SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

smokeshow

Newbie
Joined
Jun 30, 2010
Messages
10
Reaction score
10
Location
Temecula, CA
I have had my Big Block for about 2 years now.

I went to do a smoke and I noticed a flame near the door after I let it heat up for a bit.  Gas seems to be leaking from the wire mesh in the gas line and it eventually ignites.  How do I fix this problem?
 
SS, morning.... sounds like something crawled into the burner and is plugging it....  take it out and clean it....  probably a spider or something like that...  

Dave
 
Yep.. that was the problem.  I found a video on youtube where they used a wire brush to clean.  i could not find that at Lowes, so I just used my garden hose with a fine stream spray setting  and flushed it with water.  The water sprayed out evenly through the burner holes, except a few that were blocked.  I used my finger to clean the debris until water came out evenly through all holes.

I hooked it back up and the burner was all blue flame on high...  just like the day I bought it 2 years ago!

Thx for your help. 
 
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Back
Top
Clicky