Search results

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. Bigmark1127

    cold smoke (pork belly)

    I could smoke pork belly cured at a temp really cold like many 35 degrees I live in Wisconsin's it'what's to get to 68 degrees with my smoke generator
  2. Bigmark1127

    Smoke stack

    Also can I go with two 6” stacks and keep them 24” tall so I can have smoker in garage when not used?
  3. Bigmark1127

    Smoke stack

    just want to make before I weld this I changed my stack from 4” to 6” need 1046 EVS I had two 4” x 42” stacks figured but now thinking one 6” x 37” stack does this seem right or which way would be better?
  4. Bigmark1127

    High School Shop- Reverse Flow Build

    I have 1079 escape I want to run two 4” pipes because that’s what I have coming up with 42” tall above CC does seem right?
  5. Bigmark1127

    Air tires on trailer and firebox

    Thanks good info
  6. Bigmark1127

    Air tires on trailer and firebox

    I was thinking of putting a 1/4” plate between them as a buffer
  7. Bigmark1127

    Air tires on trailer and firebox

    how close is to close to have my tires on my trailer from firebox right now I have it setup with two inches of gap between inside of tire and outside wall of firebox is this enough?
  8. Bigmark1127

    Placement of racks

    Also my opening from my FB to the c.c is 35x12 inches I have a cylinder c.c 36x48 I am thinking my FB should be like 36 x 30 x24 which is 25,920 cubic inches I according to the calculations I only need 16,123 cubic inches I would like to make 36 x 24x19 which is 16,41t cubic inches but I don't...
  9. Bigmark1127

    Placement of racks

    Should my doors be cut as far down as my bottom rack?
  10. Bigmark1127

    Placement of racks

    My c.c is 36 x 48 I am thinking two maybe 3 racks but want to make sure it makes sense my f2f plate is 12 inches off bottom leaving me 24 inches to top of c.c any thoughts thanks
  11. Bigmark1127

    Firebox sizing

  12. Bigmark1127

    Firebox sizing

    It is 35.5”id x 47.5”Id cylinder
  13. Bigmark1127

    Firebox sizing

    I need 15,678 cubic inches and my opening from FB to CC needs to be 33.5 x 12 inches my CC is 36 x 48 cylinder would a 36 wide x 30 tall x 19 deep in inches be ok just seem to have a fire in it's not a user friendly size the FB is rectangle thoughts should the door be on the 19 inch side or the...
  14. Bigmark1127

    Hello from northwest wisconsin

    Thanks I just over there the last two day happy smoking!
  15. Bigmark1127

    Reverse calculation check

    Please help I am ready to start building just want to double check all the calculations they are as follows 35.5 x 47.5 inches all measurements are in inches CC volume in cubic inches 47,510 fB/CC opening 190 cubic inches 34 x 8.5 inches Area under RF plate 190 cubic inches 8.5 inches Area open...
  16. Bigmark1127

    Please help Stack question

    Thank both of you guys!
  17. Bigmark1127

    Please help Stack question

    Ah that makes s sense thank you
  18. Bigmark1127

    Please help Stack question

    Thank you I understand that but how do you figure for two stacks wouldn’t an 8” be the same as two 4” stacks?? This is where I get confused Thanks
  19. Bigmark1127

    Please help Stack question

    Sorry the numbers straight in my head
  20. Bigmark1127

    Please help Stack question

    Can you tell me you figure that out so I have the straight in my head thanks for all your help
Top Bottom
Back
Clicky