I would like to share the progress of my trailer build and would love some input as this is my first reverse flow.I have 60% of it built.I originally thought i would construct it all from new steel and basically make two boxes as cook chamber and fire box but i was lucky enough to come across a local add for some pipe that was almost half inch thick for a low cost.The gentleman who sold me the pipe also had pretty much everything i needed to c build my project at a very good price.Of course it was all used metal so a lot of sandblasting will be required at the end.
I purchased a small utility trailer with a 3500lbs axle as the base.
I purchased a small utility trailer with a 3500lbs axle as the base.
Last edited: