Wine barrel electric smoker

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

davesasmoker

Newbie
Original poster
Feb 20, 2017
2
10
Howdy all
Currently building a wine barrel smoker.
Have heard they can fall apart with use, but at least it will look good a few times!
Just finished screwing all the staves to the hoops and preparing to cut the top off and hinge it, sand and oil it. Shelves using Weber grates or expanded mesh.
Planning on using an electric stove element for the burner after seeing a filing cabinet smoker doing it.
Has anyone done this before that can share their lessons?
 
The barrel staves will shrink..  that will allows for air infiltration which is good for a smoker..   You should screw them all in place or it will fall apart...  given enough time and drying out the wood...  
 
Any experience with using an electric stove hob for hot smoking? I'm thinking it should work as I have seen this work with filing cabinet smokers on YouTube, and having a wood case can only help to insulate the inside
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky