Wet vs. dry wood

Discussion in 'Roll Call' started by gml100, Aug 4, 2007.

  1. gml100

    gml100 Newbie

    This is from a newby: I have heard people swear by soaking the wood, others swear at it and insist the wood should be dry. What say you? And do you wrap it in aluminum foil?
     
  2. ozark rt

    ozark rt Meat Mopper OTBS Member

    I've done it both ways and I really can't tell much if any diference. Today I am soaking but really have no idea why other than I just wanted to. I do use foil because it helps keep the chunks from flaring as quickly I think.
     
  3. gypsyseagod

    gypsyseagod Master of the Pit OTBS Member

    i guess that would be personal preference & the type of smoker you have. personally i just throw the wood & sometimes coal into the side firebox & light it up. if using only mesquite for a long smoke 1/2 way through the smoke i pre-burn the wood & just add the coals to keep it from being too strong.. just my 2 cents worth.
     
  4. richoso1

    richoso1 Smoking Guru OTBS Member SMF Premier Member

    If you're having a problem with fast burning, i would try soaking, especually if you are using chips.
     
  5. deejaydebi

    deejaydebi Smoking Guru

    Chips go fast - hey their small! Foiling them may help with grills, and electric smokers I wouldn't expect it'd amke much difference in a woodpan?
     
  6. I've found that soaking wood chips helps regulate the temp kinda like adding a water pan to the smoking chamber. I don't use chips often, but when I do, I soak em. And Debi is right, them chips disappear quick if you throw em on dry. My firebox smoker is big enuff to accept wood chunks but too small for log splits, so I buy the chunks quite often. BUt if you hafe a gas grill or electric smoker, chips are the way to go and you kinda need to wrap em in foil.

    Just my 3/4 of a penny worth.
     
  7. flash

    flash Smoking Guru OTBS Member

    I've always soaked our wood chunks.
     
  8. johnd49455

    johnd49455 Smoking Fanatic OTBS Member

    Ah yes the age old question. WET OR DRY.?!


    As most have said it depends on your smoker & the type of wood (chips, Chunks, or split logs)

    I use a Chargriller pro. The side fire box is big enough for small split logs. They are thick & large enough I don't soak em.

    I read on hear once that the water doesn't penetrate the wood far enough to make a difference on large logs.

    Chips on the other hand start to smoke slower so they seem to burn slower with more smoke.

    According to what I have read around these parts is that it is amater of preference.

    BTW Welcome to the best smokin site on the net
     
  9. coleysmokinbbq

    coleysmokinbbq Smoking Fanatic OTBS Member

    Hi gml100!...Welcome to the SMF!...[​IMG]...We're glad to have you aboard!!...

    Sorry it took so long to welcome you aboard!...Been offline here due to
    ISP/computer problems since July 2...[​IMG]

    Until later...
     
  10. smoke freak

    smoke freak StickBurners

    Hey gm
    Im cookin on the chargriller so i burn chunks and small splits. Didnt hear what your usin but I need a clean burning fire. Cant stress that enough.
    A smaller clean burning fire will always give better flavor than a larger fire that you are trying to slow down causing that lousy thick smoke . That is why I dont soak my wood
     
  11. ajthepoolman

    ajthepoolman Smoking Fanatic OTBS Member

    I use a Brinkmann electric unit. If I use wood chips, I soak them and put foil around them. Helps them last longer although the smoke won't roll as quickly until the pouch gets warm enough.

    If I use wood chunks (which is what I have switched to) I don't soak them at all. (except the time I bumped into my smoker and knocked a bunch of water out of the pan). The element won't get hot enough to catch them on fire as long as you don't place them directly on the element. Put them an inch or two from the element if you use an electric unit.
     
  12. placebo

    placebo Smoking Fanatic OTBS Member SMF Premier Member

    Seems I've read somewhere here that wet chips can cause creosote accumulation which is a bad thing. Scared me away from soaking, besides wood chips are cheap and oddly enough I seem to get roughly the same mileage soaked or not soaked.
     
  13. geek with fire

    geek with fire Master of the Pit OTBS Member

    I may be mistaken here, but I don't think soaked wood creates creosote buildup. Now green wood, that's a different story. By green I mean freshly cut; not seasoned.

    On another direction: I was watching a "Throw Down with Bobby Flay" one day where he challanged Buz Grossberg on spare ribs. Buz did a run through of his process and mentioned that his ribs were tendor because of all of the moisture in his logs. If I remember correctly, the were not split either. So it begs the question: Either it was just gibberish for tv, or he's able to get moisture into unsplit logs.
     
  14. stillcajun

    stillcajun Smoke Blower

    Welcome to SMF Gml100. I use log splits so I don't soak them. Btw. Unsplit logs will have some moisture in the middle depending on how long they have been drying out.
     
  15. regarding soaking chunks: I soak mine so as to slow the burn rate. I suspect if you soaked them long enough to fully waterlog them it might take a week or more, especially w/hardwood. So, I do mine like I would dry beans when in a hurry. I put them in a big pot of water on the stove and boil them for at least five minutes. Then I cover them and let them sit for at least 3 hours or over night. They suck up a lot of water than way.
     
  16. smokeitup

    smokeitup Newbie

    I usually soak chunks of wood. i found that if I soak the chunks for more than a few hours it messes up the charcoal. Try soaking chunks for about 2 hours, the wood seems to smolder nice.
     
  17. deejaydebi

    deejaydebi Smoking Guru

    To each his/her own style - just like sauce some like it sweet some like it hot it's all good it's just what you prefer or what works best for you! [​IMG]
     
  18. adb551

    adb551 Smoke Blower

    I don't think it makes a big difference.
     
  19. ccasiglio

    ccasiglio Newbie

    i try to avoid chips, but if i have to use them i always soak, otherwise i they burn too quick and flare up on me. if i'm using good grill wood (ie logs) i just spray them down a little with a hose a few minutes before throwing them on the fire to keep the bark from lighting up, but i find that with proper grill wood i don't have flaring issues with properly controlled airflow. just what works for me.
     
  20. billcohen

    billcohen ImpEx - Users Awaiting Email Confirmation

    I just discovered that my electric ECB prefers dry - especially with mesquite. Soaked chunks take too long to smolder but one or two dry chunks at the edge will start in about 10 minutes and provide about 2 hours worth of smoke.

    I use the Wally World brand of chunks, both hickory and mesquite.

    - Bill
     

Share This Page