Watlow PID Controller help needed

[kunze7]

So I don't need to set up the plug for 220

 

[JckDanls 07]

yes you will... it will have to come from a 220 breaker... the heat element will not run on 120V therefor needing 220V ... just the PID will be 110 which will come from the 220 power supply ...

 

[JckDanls 07]

lets do this.. mouse over Forums above and then click on chat... will take us to a chat room

 

[JckDanls 07]

ok.. well I'm off to bed... If you want me to call tomorrow just let me know what time is good for you... I'm home after 3 (eastern)

 

[kunze7]

So I haven't had time to work on my smoker lately but I got it wired today. I wired my plug for my smoker inside my garage. All I want to know now is do I need to hook my plug to a gfi breaker or can I hook it up to a regular breaker seeing the plug is inside ? Thanks

 

[JckDanls 07]

Well... the controller and other wire connections will be outside (so to speak)... I would go with ether a GFCI receptacle or the GFCI breaker... just to be on the safe side... better safe than sorry is my motto...