jbssmokedmeats
Smoke Blower
I thought it was a 3" and it is but it 3"od
-
Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
Reverse flow mini for camping and tailgating
- Thread starter jbssmokedmeats
- Start date
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
jbssmokedmeats
Smoke Blower
Used pice from steel shop
jbssmokedmeats
Smoke Blower
door seal is tacked on need to finish welding it grind the plugs from the valves and put hinges on and I will get the two matted
jbssmokedmeats
Smoke Blower
Got quite ablittlendone tonite on smoker
Have a ? On the plenum never really used a plenum like the looks of them don't understand the function of them but also at same time done want to screw up the draft it will have will this plenum work?? The angle and size of it is it sufficient to make this smoker work pictures are deceiving everything is level and square
Have a ? On the plenum never really used a plenum like the looks of them don't understand the function of them but also at same time done want to screw up the draft it will have will this plenum work?? The angle and size of it is it sufficient to make this smoker work pictures are deceiving everything is level and square
jbssmokedmeats
Smoke Blower
Last edited:
jbssmokedmeats
Smoke Blower
Few more pics... I'll use my plasma to cut the pit out of the fire box from inside
Oh man what a cute little smoker.
What are you going to use to support it? how much does the whole thing weight so far?
What are you going to use to support it? how much does the whole thing weight so far?
jbssmokedmeats
Smoke Blower
I'll be putting a stand/Cart together under it this weekend more pics coming tomorrow night should have it smoking by Sunday if all goes well
jbssmokedmeats
Smoke Blower
Last nights progress got a lot of Welding to do now!
Last edited:
jbssmokedmeats
Smoke Blower
Been on a low.., it was a family time weekend, said the wife. so smoker got worked on Saturday morning for 2 hours of welding. no changes other than welded the plenum stack and 75% of rf plate.
smokejumper
Smoking Fanatic
Nice work on the plenum.
It is looking like a real smoker now.
It is looking like a real smoker now.
jbssmokedmeats
Smoke Blower
Well it is getting really close have a rib cook off this weekend for the town celebration! It will be tested on its maiden voyage. Needs another vent test fired last night has good draft but I think I needs a little more air. I will take a pic of vents tomorrow need to make a latch for fb and paint oh and a front rack I'll be running my maverick on it so didn't put a therm. In cc door.
jbssmokedmeats
Smoke Blower
Well here is where it's at now seasoned it tonite had no issues hitting 350 degrees needs handles on vent cc door and fb door other than that it's done and paint of course. I'm cooking in a rib competition tomorrow with it wish me luck
Looks like you haven't put the upper air inlets in the FB door yet...
smokejumper
Smoking Fanatic
Good Luck!
jbssmokedmeats
Smoke Blower
Bingo Dave hopefully I won't need it
jbssmokedmeats
Smoke Blower
It seems to like running on charcoal as that's what I used tonight and it worked really well
You don't need it.... It just makes your smoker operate better... Cleaner smoke..... better tasting food....
The tutorial we put together is a compilation of modifications folks have used to get the best smoker possible....
jbssmokedmeats
Smoke Blower
Here is my ribs from today first ever turn in box they turned out really well I was a little pressed for time and ended up short cooking them should stayed rapped for another 20 mins didn't have quite the right pull "little tight" ended up 3rd beat my boss and a kcbs level team
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Similar threads
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is a community of barbecue and outdoor cooking enthusiasts dedicated to smoking meat.
© 2004-2026 SmokingMeatForums.com
