Retro Kit Install question

[lazydavid]

I just dry fitted my Wood Chip Retro Kit 2010 on my MES 30 (model 20010910). 

Is it proper for the lower flanges on new housing (the flanges that the new tray rides on) to make contact with the heating element?  The chip loader side of the housing is making solid contact with the element. 

 

[bobbygee]

I have the retro kit in my 40" and it is making contact to the heating element as well.No biggy.But,after using it a few times,the chip tray does become a little warped.Still useable,just makes sliding in and out a little squirley.

 

[lazydavid]

Ok, the video up on the MasterBuilt web site clearly shows what I'm seeing.  So this is a non-issue.  I did try to look last night before i posted, but the home box is Vista and it was being unhappy with the video.

 

[texacajun]

Ok, the video up on the MasterBuilt web site clearly shows what I'm seeing.  So this is a non-issue.  I did try to look last night before i posted, but the home box is Vista and it was being unhappy with the video.

here is a link to the video

http://www.masterbuilt.com/video/sept2010/smokeretrokit.wmv