• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

Paint or grease

SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

R.wiss

Newbie
Joined
May 1, 2022
Messages
2
Reaction score
0
This might have been posted previously, but... got this smoker for.fathers day 2021. Can someone explain what is going on? Is it paint peeling or just the grease that bubbles like that? It definitely needs painted right?
20220501_090719.jpg
 
Welcome to the site, can't decide if that's inside or out, inside sand/oil, outside sand paint
 
It’s the inside. That is the route I went. Got it up to temp for 2 hours and hit it with oil. Let it cook for another hour and then the rain came so I put it away
 
If inside, sand/wire brush the rust off, then re-season with oil. If outside, paint after cleaning off the rust.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Back
Top
Clicky