• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

Paint on my RF smoker

bnew17

Smoke Blower
100
10
Joined Feb 24, 2011
I just finished a 250 rf and painted rust oleum flat black paint on it. My firebox is 3/8" thick. Ive cooked on it 3 times now and there are a few spots on the firebox where the pain is flaking off and the front of the firebox is showing some rust . If i apply some high heat paint will i have to strip all paint on there now off or can i go over it? And has anybody had good luck with the high heat paint?
 

daveomak

SMF Hall of Fame Pitmaster
OTBS Member
SMF Premier Member
25,356
2,977
Joined Nov 12, 2010
I take it you did not use Hi Heat paint..... The old paint may flake off over time and touch up with Hi Heat will be necessary... or strip all the paint and re do it ......
 

bnew17

Smoke Blower
100
10
Joined Feb 24, 2011
No i didnt use high heat. I guess ill get the old paint off and try this new stuff. Maybe itll work a little better
 

Hot Threads

Top Bottom
  AdBlock Detected

We noticed that you're using an ad-blocker, which could block some critical website features. For the best possible site experience please take a moment to disable your AdBlocker.