• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

Lang Wood Question

SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

scpatterson

Smoking Fanatic
OTBS Member
SMF Premier Member
Joined
May 1, 2009
Messages
938
Reaction score
14
Location
Mcnairy County Tennessee
I will not be able to go get my new Lang Cooker until te middle of June but thinking on buying some wood now to haveit ready. What size does best in the lang. Would think that soda can size in diameter but how long should the pieces be. Im going try to get some cut to my length so I dont have to recut everything. I read some post where you can buy on the internet but that seems to be very expensive, but I guess some woods just cant eb found in certain places.
 
I would think standard cut length firewood will be fine, as long as it doesn't exceed the depth of the firebox by a lot. I don't think you'll need to do much recutting, but I guess if you had to ask I'd say 16" would be optimal.
 
I believe the firebox on the 84 is 24"x24" but the door isn't that wide I use splits about 16" long
 
i use 16 inch cut wood in mine, same as you would put in your fireplace
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Back
Top
Clicky