General model D grinder parts

[Bat119]

I have this 60 or so year old grinder looking for a new knife and a grinder plate or two, can anybody who has one of these beasts tell me what size parts I need ......22?

 

[DanMcG]

what's the diameter of the plate?
How many notches in the plate?
whats the size of the shaft on the auger where the cutter rides

 

[DanMcG]

here's a link that might help

Grinder Plates

Have been reading threads on grinder plates, I read that if you are grinding venison or beef for chili that you should use a larger plate with 1/2 holes so the ground meat is larger. I have a waring pro grinder and it has 3 plates fine, medium and coarse. The coarse plate is only 1/4. I...

www.smokingmeatforums.com

 

[Bat119]

The grinder plate is 2 3/4" blade is 2 1/2"
I've had the grinder for 30 years needed new parts for the last 20 I can never remember to take the parts to the city when I go.

 

[DanMcG]

2 3/4" is a #12, probably has one notch in the plates?

 

[Bat119]

Yes one notch I think the original plate was thicker than the one I have, I use a washer I made for a spacer is front of the blade. I found this ordering information doesn't mention thickness of the plate.

Grinder Sizes:	12, 22, 32, 52, 56, 66
Plate Type:	0-round, 1-one flat side, 2-two flat sides
Hole Sizes:	See available hole patterns and sizes on our hole patterns page.
Product Types:	PM - Powermate (hub style plate, one side for regrinding) DC - Double-Cut (flat, reversible plate) A - ATCO (flat, reversible plate)

 

[DanMcG]

here's some to look at,

Allied Kenco Sales

Allied Kenco Sales ia a butcher supply house specializing in sausage making and jerky making supplies and equipment. Our knowledge of seasoning, ingredients and sausage making techniques is extensive

www.alliedkenco.com

 

[beckyjo]

Hi Bat119,

I realize your post was a few years ago. I hope you found the parts for your General Midel D that you were looking for!

If ever you decide to not use your Model D and want to sell its auger, could you let me know please?

My aunt has a Model D and her auger broke so she's looking to replace it.

Thanks and best wishes,
Becky

 

[02ebz06]

Hi Bat119,

I realize your post was a few years ago. I hope you found the parts for your General Midel D that you were looking for!

If ever you decide to not use your Model D and want to sell its auger, could you let me know please?

My aunt has a Model D and her auger broke so she's looking to replace it.

Thanks and best wishes,
Becky

Since you said it is broken, have you tried a welding shop can be repaired ?

 

[beckyjo]

Since you said it is broken, have you tried a welding shop can be repaired ?

Hi 02ebz06,

Thanks for your question!
Yes, I believe my aunt (it's her grinder) has had it repaired at least once.
But it's not working.
See attached photo.
Best,
Becky