dynaglow verticle offset and a Pittmaster IQ 110

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

voodoochile

Meat Mopper
Original poster
Jul 20, 2013
224
17
Brownstown ILL
well I have finally tried out my dynaglow offset with my Pittmaster IQ 110 and it worked GREAT . Started the fire with charcoal and the switched to split hickory . the 110 held the temp within 10-15 degrees for 5 plus hours . Smoked a beef chuck roast ..... 2 hours @ 225 unwrapped ...... then wrap in foil and cook @ 250 for 3 hours ...... chuck roast was tender and delicious I used a rib rub and it worked well ... I didnt have a beef rub 

Next time I will smoke for 3 hours instead of 2 . I would have liked a little more smoke flavor
 
I just tried my 1176 yesterday also. May I ask what is a pitmaster 110? May need to invest in one though my temps held somewhat. Looking forward to see your qviews.
 
Last edited:
well I have finally tried out my dynaglow offset with my Pittmaster IQ 110 and it worked GREAT . Started the fire with charcoal and the switched to split hickory . the 110 held the temp within 10-15 degrees for 5 plus hours . Smoked a beef chuck roast ..... 2 hours @ 225 unwrapped ...... then wrap in foil and cook @ 250 for 3 hours ...... chuck roast was tender and delicious I used a rib rub and it worked well ... I didnt have a beef rub 

Next time I will smoke for 3 hours instead of 2 . I would have liked a little more smoke flavor
Can you share a pic of your pitmaster 110 on your Dyna Glow?
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Clicky