megt123
Smoke Blower
I use a 16" deflector plate ( Pizza Pan) that has small holes in it. Could this be a problem, or does it matter? I picked it up at Walmart and the holes are only about 1/8 inch.
-
Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
Deflector plate
- Thread starter megt123
- Start date
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
megt123
Smoke Blower
It's a UDS I built. I don't know if it's a problem. I was just wondering if the plate having holes in it was right or not and since it is only 16 inches will it deflect enough heat in a 55 gallon drum.
A lot of people drills holes in pizza pans, so it should work fine for you.
I
I
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Similar threads
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
SmokingMeatForums.com is a community of barbecue and outdoor cooking enthusiasts dedicated to smoking meat.
© 2004-2026 SmokingMeatForums.com
