Daves Smokehouse....Part 9 Test Runs

[JckDanls 07]

Hello Dave - new to the forum - here from Vancouver B.C.
The information on this forum is amazing and I've learned so much during my build. I'm building a similar size smokehouse as yours and I'm really struggling to find a burner system that will work for me. I smoke a lot of salmon every year hot/cold smoke and for me having a consistent temperature control at both low end (120F and high end (180) temperatures is critical.


I've been researching the sausage maker gas burner kit as well as the Tejas burners and I noticed that you purchased and installed the SM gas kit so I was wondering how you liked it and how you eventually installed it. Do you have any photos of the installation?
Any information would be very much appreciated

I plan on posting pics of my complicated build in very short order - getting cold and wet here so it's slowing me down a bit but I'll persevere.

Thanks - Cheers Mario

Mario... Dave is no longer on the forums... You might want to start your own thread and ask these questions.. you will get a quicker response that way... BTW.. welcome to the forums (your new addiction)

 

[Mario Trettenero]

Mario... Dave is no longer on the forums... You might want to start your own thread and ask these questions.. you will get a quicker response that way... BTW.. welcome to the forums (your new addiction)

Thanks Keith - it's very exciting to be a new member of this forum and you're absolutely correct when you say it's an addiction. I've been smoking salmon for over 30 years but I'm chomping at the bit to expand into other food products. The Cadillac (new smokehouse) is almost complete I'm very excited about the possibilities.

I will repost my original post in the builders catagory - thanks again for you help

Cheers Mario

 

[Bearcarver]

Mario... Dave is no longer on the forums... You might want to start your own thread and ask these questions.. you will get a quicker response that way... BTW.. welcome to the forums (your new addiction)

Says he wasn't here since 2013.

Bear

 

[Mountainman88]

Do I need 3 outlet s for air are does the one on the bottom bring air in? And the other 2 let air out

 

[daveomak]

alternate the corners and sides.... so you have 1 register on each side and each corner.....

 

[Mountainman88]

Do I really need 4

 

[daveomak]

No... you don't need any.... You will just have to figure out another way to control temperature and smoke...

 

[Mountainman88]

How would I do that I’m new to all this

 

[Mountainman88]

No... you don't need any.... You will just have to figure out another way to control temperature and smoke...

I’m sorry I’m so dumb about all this it’s new to me ok sorry for the confusion