Casings Problems Solved

[danbono]

Hi All I just had a very HARD time getting casings 32/35mm on my 1/2 Grizzly stuffer tube..The little veins inside the casing would not let me slide the casing on center . The casings were going an a angle ..
So here is what I did to solve the problem at least for now..I started the casing got a couple of inches on , then I put the other end around my faucet, ran some water to open the casing, they went right on.. Had to let the water drain out before stuffing.
Next time I buy casing it will be the tubed kind.Should be much easier!!

Dan

 

[danbono]

Hi All Here are some pics..Italian sweet sausage with green bell peppers & onions.

Dan

Mix

DSC01791.JPG

• danbono
• Jun 27, 2013

links

DSC01793.JPG

• danbono
• Jun 27, 2013

Patties

DSC01794.JPG

• danbono
• Jun 27, 2013

 

[boykjo]

Sausage looks great Dan.. ........

       Glad you figured out the casing problem... Were they veins or more like tags....?

 

[danbono]

Hi Proably tags, they look like whiskers.Next time sausage making , I'm going with the tubed ones..

DSC01795.JPG

• danbono
• Jun 27, 2013

Dan