Cabela's Meat Mixer (or not)

[JckDanls 07]

Man... Either I am imagining (hopeing) or there never was one... A meat mixer attachment for the commercial grinders... Not the hand mixers ... Was just searching the site and only see two hand mixers... None for the grinder...

Coulda swore I seen them a few years back...

 

[DougE]

The 50lb. mixer does attach to their grinders. Says so in the description. Not sure about the smaller ones though.

 

[chopsaw]

There used to be a mixer for the commercial grinders .

 

[DougE]

There used to be a mixer for the commercial grinders .

https://www.cabelas.com/shop/en/cabelas-commercial-grade-50-lb-meat-mixer?ds_e=GOOGLE&ds_c=Cabelas%7CShopping%7CPMax%7CProprietary%7CGeneral%7CNAud%7CNVol%7CNMT&gad_source=1&gclid=Cj0KCQjw-_mvBhDwARIsAA-Q0Q6zGCUPzHu-O_fHBbw22Ige3UcQRtxxvsteJ2MleWaSTEJ6sh4taS4aAjUaEALw_wcB&gclsrc=aw.ds

 

[JckDanls 07]

AHHHH Shooo... Not wanting that big... a 20lbr is what I remember ...

 

[DougE]

AHHHH Shooo... Not wanting that big... a 20lbr is what I remember ...

Doesn't look like the 20lb will hook up to a grinder.

 

[JckDanls 07]

So I got my grinder out (I keep it in it's box) today to knock out 6 Butts.... Here's what I see on the box... Now grant it... My commercial grinder is the previous generation... So this accessary may not be available for it anymore...

This is what I see on the box..

You can clearly see this is not the 50 lbr they offer now... And it's hooked to the grinder motor...

 

[DougE]

May luck up and find a new one on fleabay that fits your grinder.

 

[chopsaw]

There used to be a mixer for the commercial grinders .

I know mind reading is extra , but what I should have said was there were smaller mixers for the commercial grinder .
It looks like they don't make it any more .

 

[JckDanls 07]

No problem... If it's anything like the hand crank 20lb mixer I woulda been very upset... I know why Rick (@BGKYSmoker ) gave me his old 20 lbr... I used it one time... Back to hand mixing...

 

[Fueling Around]

Keith
Last time I was at Bass Pro / Cabelas I could have swore they had a 20# mixer that attached to the grinder. I was shopping for grinder accessories so checked out the the whole aisle.
Wife wants to go there this week so I'll check. Duh cannot call you on the nonexistent cell phone.

 

[jnorth]

I have a #20 mixer, it doesn't attach to the grinder but a buddy of mine with a machine shop made me a drill attachment that replaces the hand crank and a cover that slides over the top pretty tightly so it doesn't splatter ground meat all over the place as it mixes.

 

[JckDanls 07]

I have a #20 mixer, it doesn't attach to the grinder but a buddy of mine with a machine shop made me a drill attachment that replaces the hand crank and a cover that slides over the top pretty tightly so it doesn't splatter ground meat all over the place as it mixes.

I have one too... I'm not happy with the way it mixes as it just rolles the meat around the tub with the paddles instead of mixing...

 

[sawhorseray]

I used the meat mixer from Cabelas that hooked up to their 1hp commercial grinder for years, it tilted and worked like a champ. I recall it would handle a 34 pound load of ground meat. They are no longer offered by Cabela, they have cut back on a ton of stuff they used to carry. Sold all my commercial grade sausage stuff last year, all too heavy for my surgically replaced shoulder. RAY