• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

1900L reverse flow tailer

duke peterson

Joined Sep 3, 2016

I am in the early stages of planing my first reverse flow build. 

The compressor I have purchased is somewhat bigger than what I had in mind at 1900l or 500 gallons but it was the best one I could find.

I was not planning on making a trailer but think with this tank it makes sense? 

Given it is so much bigger than I had planned I though I would make the smoking chamber and firebox out of the same tank. From what I gather from the calculators if I cut the tank into a 1.5m section for the smoking chamber and a 500mm section for the firebox the proportions should be about right.

I have a mig but I figure I am really going to need a plasma cutter for this project. Any thought on if any of the cheaper cutters are worth while?

Any thoughts?



Hot Threads

Top Bottom
  AdBlock Detected

We noticed that you're using an ad-blocker, which could block some critical website features. For the best possible site experience please take a moment to disable your AdBlocker.