Search results
-
Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
-
Gravity feed build- Help!
Cooked these on it for the Super Bowl, I think I may have it dialed in now. Thanks for all the help!- bigjohnsbbqnv
- Post #8
- Forum: Smoker Builds
-
Gravity feed build- Help!
Yes, I did try Lump and it did make the flavor better, however it wasn’t significant. But I think I finally figured it out! I added more air intakes and opened up the stack to flow more Air. I also made a new fire box grate that has a tighter whole pattern so charcoal has to burn longer before...- bigjohnsbbqnv
- Post #7
- Forum: Smoker Builds
-
Gravity Feed Smoker build Questions
Testing by bigjohnsbbqnv posted Nov 24, 2018 at 12:09 PM- bigjohnsbbqnv
- Post #3
- Forum: Other Builds
-
Gravity Feed Smoker build Questions
I just finished my gravity feed build this past summer. I have cooked on it about 20 times and what I learned is for my design I overestimated the burn height for the charcoal. My build is close to the same size as what you are proposing, but I used a 6”x6” tube for the feed Shute. My heat...- bigjohnsbbqnv
- Post #2
- Forum: Other Builds
-
Gravity feed Build - help!
Thank you! Maybe once I figure it out I’ll create a thread with calculators in it.- bigjohnsbbqnv
- Post #3
- Forum: Other Builds
-
Strange texture to prime brisket at Costco
I just cut it off while trimming.- bigjohnsbbqnv
- Post #3
- Forum: Beef
-
Strange texture to prime brisket at Costco
Yeah, it’s pretty normal on the briskets from Costco. I believe it due to a steaming process during packaging. I typically see it on the outer edges of the flat.- bigjohnsbbqnv
- Post #2
- Forum: Beef
-
Gravity feed build- Help!
Thank you for bumping this for me! This has been driving me crazy for a few months now, because I love the set it and forget it aspect of this smoker!- bigjohnsbbqnv
- Post #5
- Forum: Smoker Builds
-
Gravity feed build- Help!
Done enough for testing by bigjohnsbbqnv posted Nov 24, 2018 at 12:09 PMPaint by bigjohnsbbqnv posted Nov 24, 2018 at 12:08 PMPrimer by bigjohnsbbqnv posted Nov 24, 2018 at 12:07 PMDoors added 2 by bigjohnsbbqnv posted Nov 24, 2018 at 12:06 PMDoors mounted by bigjohnsbbqnv posted Nov 24, 2018 at...- bigjohnsbbqnv
- Post #2
- Forum: Smoker Builds
-
Gravity feed Build - help!
I need some help from the pit builders on here! This past summer I finished building my gravity feed. The details of the Build and cooking fuel are as follows: Built with 1” square tubing for framing and 18g sheet metals. All welded seams. The cabinet dimensions are 22” L x22” W x34” H. My...- bigjohnsbbqnv
- Thread
- Replies: 3
- Forum: Other Builds
-
Gravity feed build- Help!
I need some help from the pit builders on here! This past summer I finished building my gravity feed. The details of the Build and cooking fuel are as follows: Built with 1” square tubing for framing and 18g sheet metals. All welded seams. The cabinet dimensions are 22” L x22” W x34” H. My...- bigjohnsbbqnv
- Thread
- Replies: 7
- Forum: Smoker Builds
-
-
-
-
-
Hello from Henderson, NV
Hello all! I am a newbie to the forum but have been cooking for about 10 years. Over the past 5 years I have dabbled in building my own pits, catering and a few competitions here and there. I am excited to share what I have learned and learn from all the great Pit Masters here! check out my...- bigjohnsbbqnv
- Thread
- Replies: 7
- Forum: Roll Call
-
Brisket Turn in
- bigjohnsbbqnv
- Media item
- Comments: 0
- Album: Competition Turn in boxes
-
Pork Turn in
- bigjohnsbbqnv
- Media item
- Comments: 0
- Album: Competition Turn in boxes
-
Rib turn in
- bigjohnsbbqnv
- Media item
- Comments: 0
- Album: Competition Turn in boxes
-
Chicken Turn in
- bigjohnsbbqnv
- Media item
- Comments: 0
- Album: Competition Turn in boxes
