Toggle sidebar

Search results

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. hollowpoint1911

    Digital temp mod

    Just curious, is input on the left side and output on the right?
  2. hollowpoint1911

    Digital temp mod

    I've been thinking of this feature for a few months now, but I was mentally trying to tackle it from another angle and ultimately decided to forget it because I wasn't sure if it would work and it was going to get really expensive. I couldn't find a gas/propane electronically controlled valve...
  3. hollowpoint1911

    masterbuilt 2 door smoker temp problem

    No problem! What did you end up going with? The Bayou Classic valve, or the LASCO one?
  4. hollowpoint1911

    My ongoing battle with Masterbuilt 2 door smoker and AMNPS

    Thanks! Right now it might be cool looking, but it's absolutely frustrating to figure it out. Nothing worse than running a smoker for hours and hours, and then you taste the final result and there's hardly a difference between smoking and cooking in a oven. Part of the reason I went with the...
  5. hollowpoint1911

    My ongoing battle with Masterbuilt 2 door smoker and AMNPS

    I went outside the other day and fired up the smoker (without food) and AMNPS tray to see if I could think of more solutions to the problem. Before I even plumbed the wood smoke from the AMNPS tray, my cook chamber was pouring smoke out of the stack and back vent. And it dawned on me...the...
  6. hollowpoint1911

    Needle Valve Mod

    I run the same needle valve config as kampmann17 and I've had zero issues with flame blowout when running as low as 225F. With my particular needle valve (can't speak for the more common Bayou Classic version), I can bring the flame down a lot lower and probably get into the high 100s, but I've...
  7. hollowpoint1911

    masterbuilt 2 door smoker temp problem

    When I did mine, I saw posts 21 and 23 in this thread: http://www.smokingmeatforums.com/t/188229/needle-valve-mod/20 and I liked the idea of adding more length to my propane hose so I went with that. I'm really happy with my setup and I can nail the common cook temps like 225, 250, 275 without...
  8. hollowpoint1911

    My ongoing battle with Masterbuilt 2 door smoker and AMNPS

    Nope, I don't have a preference for heavy smoke flavor...I'm just not getting very much smoke flavor with the AMNPS! The first few runs I've used Todd's applewood pellets.Over the weekend, I went with a 50/50 split of applewood and Pitmaster's Choice (lit from both ends). I guess the one thing...
  9. My ongoing battle with Masterbuilt 2 door smoker and AMNPS

    My ongoing battle with Masterbuilt 2 door smoker and AMNPS

  10. hollowpoint1911

    My ongoing battle with Masterbuilt 2 door smoker and AMNPS

    I picked up a Masterbuilt Dual Fuel propane 2 door smoker at the beginning of July and after the first few smokes running apple wood chunks in a cast iron pan, I decided to try out a AMNPS pellet tray. The goal was to try and get a longer duration of "unattended" time where I wouldn't have to...
  11. JYgVNRe.jpg

    JYgVNRe.jpg

    • hollowpoint1911
    • Media item
    • Comments: 0
    • Album: My ongoing battle with Masterbuilt 2 door smoker and AMNPS
  12. 4JSVhmh.jpg

    4JSVhmh.jpg

    • hollowpoint1911
    • Media item
    • Comments: 0
    • Album: My ongoing battle with Masterbuilt 2 door smoker and AMNPS
  13. qOWJOI9.jpg

    qOWJOI9.jpg

    • hollowpoint1911
    • Media item
    • Comments: 0
    • Album: My ongoing battle with Masterbuilt 2 door smoker and AMNPS
  14. hollowpoint1911

    masterbuilt 2 door smoker temp problem

    From what I've seen, there isn't a regulator assembly with needle valve that you can purchase and install as easily has installing a needle valve yourself. It's a pretty fast process that I'd say takes maybe 10 minutes going slowly, including the time it takes to do a soapy water leak test.
  15. hollowpoint1911

    Masterbuilt Pro Dual Fuel - Temperature to hot on low

    This is a really common problem with this smoker (I own one as well). To get temperatures into the 200-250F range, you'll have to spend a little money and buy a needle valve which gets installed inline between the propane tank and the burner. If you search "needle valve" on this forum, you...
  16. hollowpoint1911

    Is there a coupon code for July 2015?

    THANK YOU! This is the one I was looking for.
  17. hollowpoint1911

    Knife recommendations

    Just a heads up on Wusthof and Henckels... There is a HUGE difference within the model offerings for each knife brand. Each brand has forged blade offerings (which they built their reputation on), and they now sell stamped blade knives which are of lesser quality/durability/price. For...
  18. hollowpoint1911

    Need Help Sourcing The Thermo Probe Inserts

    Do you happen to know what the approximate dimensions are on that grommet?  Been looking for something really similar to this for my propane smoker.
  19. hollowpoint1911

    Is there a coupon code for July 2015?

    Hey guys, is there an active coupon code for A-Maze-N smokers for July? I ordered my first AMNPS tray direct from amazenproducts.com on like July 5th and at the time of purchase it didn't seem like there were any active sales so I placed a order at regular price. A week later, I thought I saw...
  20. hollowpoint1911

    Masterbuilt lp mailbox mod placement?

    Yeah, I'm not sure how a stack would improve it either seeing as I already have a gaping hole of frustration at the top of my smoker. I have a extra 5" to 4" ac vent reducer when I bought parts to plumb the "mailbox" into the smoker. It's at least 8" tall. I might just throw that on top of the...
Top Bottom
Back
Clicky