Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
I have this 60 or so year old grinder looking for a new knife and a grinder plate or two, can anybody who has one of these beasts tell me what size parts I need ......22?
Confirmed my Pit boss series 3 is out of whack 3 thermometers a therm pro a dial inside and an analog all agree the control panel is wrong. Not a big deal if you know the correction my first shoulder took 16 hours to reach 195* the crowd was getting unruly from hunger so I had to pull it I...
Mine is exactly the same temp off by 35-50* I use my temp pro to monitor the temp I do still like the smoker it works well but with the temp offset my max is 315* really not a problem I never go that high when smoking. The first thing I noticed when assembling is the temp probe is to low and...
Pit boss digital 3 heat test
Set temperature 350 degrees
Thermpro probe in the center of unit ½ pan of wood chips water in the pan
Start 54 deg. Ambient
20 minutes 256 deg. Digital readout 281
40 minutes 287 deg. Digital readout 320
60 minutes 309 deg. Digital readout 332
80 minutes 302...
It was the oven temp probe on my Thermpro causing most of my troubles it was reading 60 deg. low. I put both probes and a dial thermometer in a pot of water to test, the dial and the meat probe read 190 the oven probe was at 130. Thermpro is sending a new probe under warranty excellent customer...
It was perfect in every way, except no matter what they tried they couldn't get the clone to stop using foul gestures and language.
Finally, the enraged scientist in charge of the project pushed him out of a window, and the clone fell to his death.
Since he wasn't an actual human, the legal...
Yes Thermpro stands behind their products my oven probe was giving inaccurate readings after providing my Amazon order number they sent a new probe two thumbs up here
I've been smoking for a number of years starting with wooden and old fridge smokers when we were doing 100's of pounds of moose and deer sausage. Nowadays I do much smaller batch's I've been using a Bradley digital for the past 5 years, I bought a Pit boss silver digital 3 just getting the bugs...
When I assembled my unit I noticed the temp probe was very low and in my opinion too close to the burners I used a Thempro to check temps held on 250* with no food inside. I think mine is out of calibration the new control panel should fix the problem.
To add to your review Pit boss customer service is excellent I bought the Silver 3-Series Vertical Electric Smoker a few days ago mine would not go above 250 deg. no matter what it was set at it would tap out at 250, phoned Pit boss talked to the friendly service guy and they are sending a new...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.