Toggle sidebar

Search results

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. dockman

    Ham Smoke or not?

    I am buying a half a hog and having it butchered. The price includes smoke and cure. Should I tell them I do not want the ham smoked?
  2. dockman

    Reverse flow help

    I tested the way it is now today. It worked pretty good however I can see separate adjusters would be nice.
  3. dockman

    Reverse flow help

    I can change it pretty easy
  4. dockman

    288 Gal Propane Tank RF Build

    Looking good!
  5. dockman

    Reverse flow help

    Forgot to add picture
  6. dockman

    Reverse flow help

    Here is my redesigned door. Vent has been dropped 3" and added a divider to make bottom 3" x 4" and top is 3" x 2-1/2"
  7. dockman

    Reverse flow help

    Would this work? Can all holes be same sq in? One slider adjust top and bottom vents.
  8. dockman

    Reverse flow help

    I would like to avoid 2 separate vents if possible. I do understand what you are saying. If i have to stay with upper/lower vents then I want them both on door end.
  9. dockman

    Reverse flow help

    I own a welding shop.
  10. dockman

    Reverse flow help

    It is adjustable! I don't like the hole in bottom and may redesign the door with vents lower?
  11. dockman

    Reverse flow help

    Cut a 3" x 10" hole right under fire basket and plugged 2" (top side) of door vents. That done the trick cc temps peaked at 365. Thank you for the help Dave.
  12. dockman

    Reverse flow help

    Would vents on each side at bottom work?
  13. dockman

    Reverse flow help

    Thanks Dave that is kind of where my thinking was at. Glad you give me dimensions on bottom hole cause I was not thinking that big. Right now it is at the most 8 sq in.
  14. dockman

    Reverse flow help

    My thoughts also Dave but hen I cut the hole in floor right under fire it did not help any. Do you think I should increase the vent in floor to say 3" x 5" and make it adjustabe and then close off the tops of existing?
  15. dockman

    Reverse flow help

    CC is 3/8" thick. It takes a good 1 1/2 hours to heat to 250. I also cut wood down to the size of little bigger then a beer can.
  16. dockman

    Reverse flow help

    Here are a few pictures
  17. dockman

    Reverse flow help

    I built this for a buddy last spring. We are having problems getting over 250-275. The cc is 24" x 77", fb is 24", exhaust is 5" x 30", fb is mounted 8" up and reverse plate is same level, rf plate ends 7 1/2" from end. I have increased rf plate to cc end a few inches to about 9", cut a 2" x 3"...
  18. dockman

    Can this fridge be used for a smoker?

    Thanks guys I had my nephew sign up and start reading. He will do a build thread when he starts.
  19. dockman

    60 degree difference upper to lower rack smoker

    Have you figured out anything?
  20. dockman

    Fridge firebox size

    Good question hope someone that knows answers you!
Top Bottom
Back
Clicky