Search results

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. okiecat

    MES 40 gen 2.5 pid wiring

    Ok. Just checked everything. I had it right. 1/3 and 2/4. Also unwind and ck continuity. 1 to left plug prong-00. Good. 2 to right plug prong—00 good. 3 to 7 000 good. 4 to6–00 good. This also checked out with wires connected back. What now
  2. okiecat

    MES 40 gen 2.5 pid wiring

    Thanks Kurt, I kinda thought I had the 3-7 wire figured out. I want to say to all, especially Tallbm. Thanks for all the help and patience. I would not have started this project if not for Tallbm's original thread for the Gen 1 rewire.
  3. okiecat

    MES 40 gen 2.5 pid wiring

    One more pic
  4. okiecat

    MES 40 gen 2.5 pid wiring

    Ok 3 to 7, 4 to 6, 5 to 8 All terminals accounted for. Which ones hot and which ones neutral?
  5. okiecat

    MES 40 gen 2.5 pid wiring

    Ok 3 to 7 is 00, 3 to all others is 1, 8 to 5 is 000, 8 to 6 is 1, 7 to 5 or 6 is 1 All terminals are unplugged,
  6. okiecat

    MES 40 gen 2.5 pid wiring

    ok Waiting to get fire built in shop. Its cold here today, 18 and wind chill 3*. Also I have already unplugged rollout switch. They had a barb on the connector. Fortunately I had the correct pliers. Also when I touch my terminal ends together it goes to is on 1 and stays there. Going to...
  7. okiecat

    MES 40 gen 2.5 pid wiring

    Yes TallBM, All wires were unplugged. And your pics and diagram is correct
  8. okiecat

    MES 40 gen 2.5 pid wiring

    Thanks Sarge, I was lucky enough to find my owners manual for my multi meter of 15yrs ago. If it reads 1 is that a complete circuit. When it was reading 0 it would start out like 340 and rapidly count down to 0, in a matter of seconds. Never heard a beep on either one, but I'm pretty deaf.
  9. okiecat

    MES 40 gen 2.5 pid wiring

    Got in tonight and went to shop to try the continuity game. Well I’m a little confused so I made a diagram of what happened The numbers are just to keep track of everything.
  10. okiecat

    Where to buy a Gen 2.5 40" MES?

    +1 on Cabela's. Got mine about 3 wks ago. Putting PID in this weekend.!!
  11. okiecat

    MES 40 gen 2.5 pid wiring

    Great. Sounds like even I can handle that. Hope this helps others too with the 2.5 Gen
  12. okiecat

    MES 40 gen 2.5 pid wiring

    The wire from circuit board are all together and go thru a hole. Nothing to see to tell where there going. Will get a pic tomorrow night. Had to go to work today and tonight. The pics and diagrams you have put up help me a ton understand what I’m trying to do. Can’t work on it till Sat...
  13. okiecat

    MES 40 gen 2.5 pid wiring

  14. okiecat

    MES 40 gen 2.5 pid wiring

  15. okiecat

    MES 40 gen 2.5 pid wiring

    Sorry Jimmy, I got busy reading the other post I missed yours. Got the pics figured out. Will take some more tomorrow. Its on its back right now. Paid about $290 at Cabelas, that was a couple wks ago.
  16. okiecat

    MES 40 gen 2.5 pid wiring

  17. okiecat

    MES 40 gen 2.5 pid wiring

  18. okiecat

    MES 40 gen 2.5 pid wiring

    Thanks thats detailed thats also the reason I asked, I am clueless when it comes to wiring and electronics. I can do a lot of things but that is one that skipped me. I do have a multimeter but Im going to try the pics first. I like the idea of getting them of phone to my mac book. We will...
  19. okiecat

    MES 40 gen 2.5 pid wiring

    Just bought a Cabelas sportsman elite 40. Also purchased a Auber WS-1510 ELPM. Read the tutorial by Tallbm on wiring Gen 1. My question is my wires are different They all come from same place and I have 2 Copper braided looking wires but I don't know which one would be #4 or #3 as in the gen...
  20. okiecat

    Decided I need a Electric to go with my gas and pellet rigs

    Oh If I decide I want a PID, which one? Order direct or are there vendors here on the site.
Top Bottom
Back
Clicky