Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
Hey guys. I have a MES 30 cabinet that I modified with an Inkbird PID and different burner and use the mailbox mod for smoke. The only issue I am having is the when hanging summer sausage or snack sticks the bottom (closer to burner) is cooking faster than the top. I tried a fan to even out...
Here's a few links:
This is how to rewire the MES for a PID controller:
https://www.smokingmeatforums.com/search/11075348/?q=simple+rewire&c[title_only]=1&o=relevance
My own hack for using a smoke tube either inside the MES or in the mailbox mod...
...But being able for it to cook somewhat evenly is gonna be essential for me. Thank you for taking the time to read this. Also have a auburn PID on the way but might need to get a bigger one if I end up having to put a second element in and wiring them together. Figure that out when I get there
HI from the NJ shore!
Did you use the Pro Mode using the cook?
Pro mode is the SMOKE Mode.
If it says PID, you did not use the PRO mode.
I have a Grilla Chimp
Time to get an Auber PID and bypass all the electronics on the controller panel. Will make a much better smoker for you with more controllable temps.
https://www.smokingmeatforums.com/threads/mes-rewire-simple-guide-no-back-removal-needed.267069/
Many of us run this unit...
...brutal. The 2nd type of stall, with sausage and cured stuff has kicked my butt a LONG time. Combination of warming product up prior to smoke, PID control, and the towel has pretty much put an end to it for me. Like I said in the other thread, the towel brought some other benefits as well...
Electric heat is much easier for me and I have several PID controllers (my background is in automation), but I havent run power to the pavilion yet. I was going to run a small circuit out there to run some LED light strips in the rafters, one outlet and an electric fan for summer. Electric heat...
...have stated. This would be the time to ditch that major weak point and failure point of the MES and do the simple rewire and go with an Auber PID controller to turn your smoker into an absolute beast of an electric smoker. Doing so would allow you to smoke where you will hit a set temp and...
I'm thinking it takes more than just a shut off solenoid... I believe there is a unit that controls the temps by metering the propane/gas... It's PID controlled... There was a build or two here if I remember right... But we all know how that goes... The ReMemory is a terrible thing...
...looking for advice on my set up and process. The ration was 70/30 in 17mm casings. I have a MES40 that I just retro fitted with a auber WS1510 PID and the auber circulating fan. I did a trial run with the PID and some bricks. Determined that it didn’t need further programming out of the box...
There is a guy on SMF that posted his PID mod for automatic control of a propane burner in a smokehouse. The only change I would make to it is a constant low flame to reduce the swing in temps. instead of on/off with the burner. This is accomplished via a by-pass of the controller with a manual...
...cord through the 2" air inlet for the firebox. I will just sit the 120v element on the fire box floor. First I want to see if the multi-stage PID controller I used for the old MES Snack Stick smoker paired with a 120v element can heat the bigger cabinet through convection since it's a...
Best additions I added to the Traeger Eastwood were an upper rib rack and Grill Grates. If you're not familiar with Grill Grates, check them out. You can replace your existing grates or just lay them right on top. Great heat diffusers.
Take a look @ Grilla Grills.
They run sales , can save some $.
IMO: Offers more then Rec Tec in features.
Its not a piece of junk !
Alot of SS: Grates and a nice double walled body
PID has a Pro Mode for smoking ,Auger and RT Adjustments, It Wifi.
TAKE A LOOK!
Update: Had zero issues. Didn't even get the welding blanket. MES came right up to temp and held the entire cook. Obviously lost temp when I had to open and swap racks, but came right back after closing the door. Probably cost me some time overall, but no big deal. Auber PID is awesome.
Tha you for the reply! I replaced the element also. Plugged it in, heated up instantly. Un plugged it and hooked up a PID controller i built, dropped the probe through the smoke vent on the side wall, set it to 200° F, the initial swing was 10° either side of target which makes sense since there...
...shutoff valve at the beginning of the gas line in case of flameout. There will also be a bypass around the solenoid valve controlled by the pid with a needle valve to have a small flame constantly so wont need a pilot. Thinking about a second needle valve before the solenoid valve in case I...