Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
...back to an offset, can't stand babysitting it anymore, so I'm back to a bigger pellet pooper, still use the drum for some things, but I use a PID stoker unit on it. 90% of my smoking is 90 to 100* + summer heat, and I just don't enjoy sweating over coals for hours on end anymore, so it's back...
...with thermocouple to sense when the fire goes out and cuts the gas flow. dont want your new smoker blowing up. yours is small enough chamber, you could use electric heat element. there are a few good threads on here for using a PID to control the heat with a solenoid valve to regulate the gas...
I have the MES sportsmen model. My unit at 2 different times got over 350°f without shutting down. One time it got over 375. This was a brand new unit at the time. I wouldn't trust the cutoff switch. I replaced everything with a pid unit I wired in and a better cutoff switch.
...with an upgrade to buy a power pack if you choose.
SS grates
Double walled body to insulate in colder climates.
2 nd tier warming rack.
PID, WIFI Controller , Pause feature: Allows you to open smoker to baste and avoid Temp spikes.
Grilla Grills sells direct to you!
No middleman BS.
It was...
...working just fine after your cleaning. ie about 3-4 mins to initial fire (temp rise), the fan kicks on and 150 temp is hit in 2-3 mins, then the PID kicks in and slowing increase to 225 over about 20 minutes. The cold temp is the contributing "dips" in the climb when the auger or fan cycled...
GMG makes a nice smoker, I have the baby one, and many of my friends have bigger ones. They have a true PID controller and have a very nice smoke profile.
Recteq is also nice (I love mine) but if the GMG is in your price range and the RT isn't I would snag one without hesitation.....
Relay on the board in the bottom has welded it's contacts in the on position. Replace the board, if it is still available, or better, rewire per instructions above and buy a PID controller for a significant improvement in your smoker.
Congratulations, this sticks look amazing!!!
You are going to be a stick making machine and if anything goes wrong with the unit, you now where to look and how to easily fix it.
Welcome to the PID club! :D
I also did the Auber wifi PID re-wire on my MES. Best couple hundred bucks I've spent. The re-wire was a little confusing for me, but the resources here helped. Now I basically have a $1,000 smoker. It's incredible and holds temp within a degree forever. I added the mailbox modification for...
@DAW if you want to go the PID route this is the one most here would recommend.
https://www.auberins.com/index.php?main_page=product_info&cPath=14_28&products_id=110
As far as the wiring goes follow the links in my previous post. A lot of us here can help with this especially @tallbm.
Both my electric smokers are controlled by PID, even though the original controls can still work. If I were in your shoes, there is no way I would spend any money on replacing the less than optimal original control system when that money is far better spent upgrading to a PID controller.
I have been debating the same thing electric and size/watts vs propane. Mine isnt as big 30” sq inside dims x 5.5’ tall. I am leaning towards using a tejas low pressure burner with a thermocouple. Not sure how or if can use a pid with propane.
Ok as many know I have the MES 30 with the arbor pid- it works great - for 10 lbs or less.
I’d like to be able to smoke 20 lbs at a time. What would be a good step up and still use the pid?
...coarse you don't have to get as fancy on the controll panel...
https://www.smokingmeatforums.com/threads/metzgermeister-schloss.157021/page-3
Also.. This is the PID I use... It has a 30 step ramp/spoak feature...
...love is going through a tough time. Best wishes to you and your family.
Good luck on the rib cookoff. I wish you success!!!!
I also use a PID on my Baby. She holds temp really well but I am like you. I want a bit more to steady my mind during cooks.
If I ever need another smoker, I...
Yes the TC would sense the flame and if it blows out would shut off the gas supply. I read that thread yesterday and should be a great help. Inda, I like that bypass idea. Should be able to add a needle valve to control the low flame on the loop around the valve controlled by the pid.
I see there's lots of electric smoker mod threads. A bunch using a PID controller which is cool. Just so happens I used build electronic devices, and while I usually did it the hard way, I recently bought my very first Arduino. ( Had to build new controls for a coal stove using one). It just...
Anyone have any issues with an MES maintaining temp in below freezing temps? Thinking about smoking some sausage tomorrow but temp will be single digits outside. I have an auber pid by the way.
I'm not your guy on this, but I can assure someone will chime in soon with great advice. I did the MB40 with PID and it works very well, but I'm also not sure I'd do it that way again. I went cheap because I wanted to prove to myself that I'd enjoy sausage making enough to invest, so I totally...