Recent content by grilldad

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. grilldad

    The ultimate Dyna-Glow wide body modification

    Another update. The burner is a bit overkill for smoking below 250 and the wind can blow the flame out. After noticing the temperature dropping I would light the burner again and has lost my leg hair a few times. So a thermocouple was installed for safety. Then added more firebrick to the...
  2. grilldad

    The ultimate Dyna-Glow wide body modification

  3. grilldad

    The ultimate Dyna-Glow wide body modification

    I did some more mods today. I mounted my firebrick how I wanted and opened up the hole for the stack. This thing works great but keeping the pellet trys smoking is a work in progress. I'm thinking the stack is still too small. The pellets smoke like crazy when the burner is off but die out soon...
  4. grilldad

    The ultimate Dyna-Glow wide body modification

    This is the burner at 275 in the rain at 48 degrees outside temp. She has lot's of power for when I really load this thing up!
  5. grilldad

    The ultimate Dyna-Glow wide body modification

    I could still use charcoal but not with the ash pan. My plan is to run propane most of the time. I'll use an electric hot plate in the main chamber for fish or sausage. To hit 120
  6. grilldad

    The ultimate Dyna-Glow wide body modification

    After years of cooking in a homemade trash can smoker I decided to upgrade a little. I settled on a Dyna-Glow wide body vertical offset charcoal smoker. I'm not a fan of chasing Temps or continuously feeding the firebox so I ordered a banjo burner on Amazon with a 20lb regulator and some fire...
  7. grilldad

    DIY Hydro Sausage Stuffer

  8. grilldad

    Brinkmann Smoke N Grill Professional-Smoker Mod

    An update on my modded smoker. and to answer some questions. The valve and fittings are 1/4''. You will also need a flaring tool or have the hard wear store do it for you like I did. I didn't install a damper in my stack because its really not needed on a gas smoker. I did block some of the...
  9. 20141021_144525.jpg

    20141021_144525.jpg

    • grilldad
    • Media item
    • Comments: 0
    • Album: Brinkmann Smoke N Grill Professional-Smoker Mod
  10. 20141021_144511.jpg

    20141021_144511.jpg

    • grilldad
    • Media item
    • Comments: 0
    • Album: Brinkmann Smoke N Grill Professional-Smoker Mod
  11. 20141021_144457.jpg

    20141021_144457.jpg

    • grilldad
    • Media item
    • Comments: 0
    • Album: Brinkmann Smoke N Grill Professional-Smoker Mod
  12. 20141021_144437.jpg

    20141021_144437.jpg

    • grilldad
    • Media item
    • Comments: 0
    • Album: Brinkmann Smoke N Grill Professional-Smoker Mod
  13. DIY Hydro Sausage Stuffer

    DIY Hydro Sausage Stuffer

    • grilldad
    • Album
    • Comments: 0
  14. grilldad

    DIY Hydro Sausage Stuffer

    I saw the Dakota stuffer and like many others said to myself " I could make that myself " So I did! Even with the clear pvc at $25 a foot It was still cheaper than one you could buy. We have been using our kitchen Aid stand mixer to do all the grinding and stuffing but It takes forever to stuff...
  15. 20141028_153604.jpg

    20141028_153604.jpg

    • grilldad
    • Media item
    • Comments: 0
    • Album: DIY Hydro Sausage Stuffer
See more
Top Bottom
Back
Clicky