Recent content by bigjohnsbbqnv

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. bigjohnsbbqnv

    Gravity feed build- Help!

    Cooked these on it for the Super Bowl, I think I may have it dialed in now. Thanks for all the help!
  2. bigjohnsbbqnv

    Gravity feed build- Help!

    Yes, I did try Lump and it did make the flavor better, however it wasn’t significant. But I think I finally figured it out! I added more air intakes and opened up the stack to flow more Air. I also made a new fire box grate that has a tighter whole pattern so charcoal has to burn longer before...
  3. bigjohnsbbqnv

    Gravity Feed Smoker build Questions

    Testing by bigjohnsbbqnv posted Nov 24, 2018 at 12:09 PM
  4. bigjohnsbbqnv

    Gravity Feed Smoker build Questions

    I just finished my gravity feed build this past summer. I have cooked on it about 20 times and what I learned is for my design I overestimated the burn height for the charcoal. My build is close to the same size as what you are proposing, but I used a 6”x6” tube for the feed Shute. My heat...
  5. bigjohnsbbqnv

    Gravity feed Build - help!

    Thank you! Maybe once I figure it out I’ll create a thread with calculators in it.
  6. bigjohnsbbqnv

    Strange texture to prime brisket at Costco

    I just cut it off while trimming.
  7. bigjohnsbbqnv

    Strange texture to prime brisket at Costco

    Yeah, it’s pretty normal on the briskets from Costco. I believe it due to a steaming process during packaging. I typically see it on the outer edges of the flat.
  8. bigjohnsbbqnv

    Gravity feed build- Help!

    Thank you for bumping this for me! This has been driving me crazy for a few months now, because I love the set it and forget it aspect of this smoker!
  9. bigjohnsbbqnv

    Gravity feed build- Help!

    Done enough for testing by bigjohnsbbqnv posted Nov 24, 2018 at 12:09 PMPaint by bigjohnsbbqnv posted Nov 24, 2018 at 12:08 PMPrimer by bigjohnsbbqnv posted Nov 24, 2018 at 12:07 PMDoors added 2 by bigjohnsbbqnv posted Nov 24, 2018 at 12:06 PMDoors mounted by bigjohnsbbqnv posted Nov 24, 2018 at...
  10. bigjohnsbbqnv

    Gravity feed Build - help!

    I need some help from the pit builders on here! This past summer I finished building my gravity feed. The details of the Build and cooking fuel are as follows: Built with 1” square tubing for framing and 18g sheet metals. All welded seams. The cabinet dimensions are 22” L x22” W x34” H. My...
  11. bigjohnsbbqnv

    Gravity feed build- Help!

    I need some help from the pit builders on here! This past summer I finished building my gravity feed. The details of the Build and cooking fuel are as follows: Built with 1” square tubing for framing and 18g sheet metals. All welded seams. The cabinet dimensions are 22” L x22” W x34” H. My...
  12. bigjohnsbbqnv

    Offset w/Pizza Oven Build

    Thank you!
  13. bigjohnsbbqnv

    Hello from Henderson, NV

    Thank you!
  14. bigjohnsbbqnv

    Hello from Henderson, NV

    Thank you!
  15. bigjohnsbbqnv

    Hello from Henderson, NV

    Thank you Kruizer and gmc2003!
See more
Top Bottom
Back
Clicky