Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
Het Sly! I allowed the reverse flow plates to be welded to the top edge of the firebox and to be welded about 2 inches below the door openings with a gradual slope down hill to allow the grease drippings to flow down to the drain. So the cut had to be below the doors. 2 - 3 inches below the doors worked perfect.