WSM 18.5 owner wondering who is using what for temp control/blower/stokers

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.
I too use the Pitmaster IQ - but I have the IQ-110. It was worked flawlessly for the past 3 years and is totally fit-and forget.
 
 
Doesn't sound good any more,Piece of S*** fan came on when I plugged it in.Lights were showing high temp,my dial thermo read 160* F

Richie
Well you shouldn't have tried adjusting it using that big hammer 
biggrin.gif
 
I have an Auber and it works well but most of the time if I use a controller it will be a Party Q. I have 2 and both have been adapted to use 110v. I can still use them with batteries but a set only seems to last about 12 hours for some reason.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky