- Nov 25, 2013
- 47
- 13
Almost done the tear down. So far it was pretty easy. Everything was connected with screws and it all came apart as planned. All I have left is to pull the plastic rack pegs and the plastic trim on the inside at the front. Left that for another day since it seems to be well connected, and is going to probably have to be cracked and broken in order to pry it off.
I need a bit of advice here...
1 - Should I strip the paint from the inside? Or will seasoning it make it safe?
2 - Will the fiberglass all have to be taken out? I am unsure what its heat tolerance is (see pic 7).
3 - Anyone know of any specific insulation that can be used to seal between the inner and outer shells? A few places have large gaps that will need to be filled (see Pic 7).
I need a bit of advice here...
1 - Should I strip the paint from the inside? Or will seasoning it make it safe?
2 - Will the fiberglass all have to be taken out? I am unsure what its heat tolerance is (see pic 7).
3 - Anyone know of any specific insulation that can be used to seal between the inner and outer shells? A few places have large gaps that will need to be filled (see Pic 7).
Last edited: