themule69
Epic Pitmaster
well since theHi David and Roger,
thank you! for all the ideas/tips and encouragement.
I'm still building the brake.
There is good news and bad news,
the clamp for the brake will be the (J Section) (is what I call it), it's like a (T Section) with one extra foot, or a (I Section) with one less foot, the (J Section) will let us go past 90°, maybe 100° - 125° some were, So the clamp is good.
Now for the problem/bad news
the two Channels are not flat, the two faces when face to face (or at 180°) has a 7mm gap in the middle / center.
I could not solve this with a coldand before you ask!, I did!, I tried more than one, I got up to 5 cold ones and no solution.
ideas / tips ?
Lee
happy smoken.
david