Mes Door Gasket

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

bamafan

Smoking Fanatic
Original poster
OTBS Member
Jun 4, 2008
822
26
Crestview Fl
My gasket is pulling off the door of my MES and I was going to autozone this weekend to buy some High temp RTV to try and glue it back on. Has anyone used something better that had this problem?
 
Now there's a visual I didn't need!
PDT_Armataz_01_41.gif
 
The high temp RTV silicone sealer should be fine. You can search for food grade RTV but most of these sealers are pretty much the same. Not going to give off toxic fumes. These emit acetic acid as it cures but that's about it.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Clicky