Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
temperature control
Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
In a reverse flow smoker, Is it normal to have a 35 F temperature variance between one side of the smoker and the other side? Is there a way to resolve this problem? what techniques can be used to go around it?
I have had An Oklahoma Joe Reverse Flow Smoker for quite sometime and I have used...
I have a Landman vertical smoker and it runs too hot. I have tried opening, closing and blocking the vents....no help. I run about 255+ as low as I can go without opening the door. I have a ThermPro probe suspended from the hooks in the top of the smoker as my temperature source. Water pan...
Hi all, I'm new in the community, i searched in the forum bu did not find answers.
I just purchased a OJ Highland. Today had to season it, so I thought to equip probes on the grills (iWeber2) to check the temps and try to learn how it works. The smoker has been sealed w high temp silicon and...
Hey everyone,
Today i will be making 8 racks of ribs. I've got 4 on the top rack and 4 on the main rack. Im running at 250* and my grill display says 250 (+/- the usual). My thermometers are reading way way lower at around 160 to 180*. There's hardly room for the thermometers and I'm guessing...
Scenario: You added another log to the FB. For whatever reason, the temp runs away from you. Do any of you completely close the intake valve? Or is completely closing the valve a big no-no? The coals should still be burning after fully closing the valve, right?
Hey All, I'm new to smoking. Have to start out simple, so my first two smokes was chicken leg/thighs, and turkey legs. I bought me an Oklahoma Joe offset smoke/propane combo. Instant success. However... my temps right out the gate jumped to 250-280 range. I couldn't get it to drop and my overall...
Just purchased a new to me Bar B Chef offset smoker. I am having problems getting it above 230. Curious; how full do you normally load your firebox? I am graduating from using a weber kettle and I can get that up to 300 with very little charcoal. I have about 5 starter chimneys worth of...
My thoughts on "PID Controllers - Part 3A of Why I don't recommend one."
Topic 3: What is a PID controller?
--3A: Proportional control--
Note: I'm specifically saying I don't recommend a PID controller, not that I don't want to control the temperature! Also, there is nothing wrong with using...
My thoughts on "PID Controllers - Part 2 of Why I don't recommend one."
Topic 2: What are some different methods in controlling temperature?
Note: I'm specifically saying I don't recommend a PID controller, not that I don't want to control the temperature! Also, there is nothing wrong with...
My thoughts on "PID Controllers - Part 1: Why I don't recommend one."
Note: I'm specifically saying I don't recommend a PID controller, not that I don't want to control the temperature! Also, there is nothing wrong with using a PID controller; I'm just saying it's not needed!
I'm going to...