Search results

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. devilsmoker

    Use what I got...

    My firebox is below my door. I drilled a 1 inch hole through the block into the fire box. I did this 2 times on the front and one on the side. I welded a washer onto some 3/4 steel pipe that goes into the interior of the box. I will use a magnet that can slide across the washer to limit the...
  2. photo 3-1.JPG

    photo 3-1.JPG

    • devilsmoker
    • Media item
    • Comments: 0
    • Album: Use what I got...
  3. photo 2-1.JPG

    photo 2-1.JPG

    • devilsmoker
    • Media item
    • Comments: 0
    • Album: Use what I got...
  4. photo 1-1.JPG

    photo 1-1.JPG

    • devilsmoker
    • Media item
    • Comments: 0
    • Album: Use what I got...
  5. devilsmoker

    Use what I got...

    I finished up a few weeks ago. .25 steel door. I had to use some angle iron on the back side to get it flat. When the metal supply house sheared it, it put some warp in it.. Handle detail. My welder used an oversized tube to create a bushing. Inside handle stop Found some perfectly...
  6. photo 5.JPG

    photo 5.JPG

    • devilsmoker
    • Media item
    • Comments: 0
    • Album: Use what I got...
  7. photo 4.JPG

    photo 4.JPG

    • devilsmoker
    • Media item
    • Comments: 0
    • Album: Use what I got...
  8. photo 3.JPG

    photo 3.JPG

    • devilsmoker
    • Media item
    • Comments: 0
    • Album: Use what I got...
  9. photo 2.JPG

    photo 2.JPG

    • devilsmoker
    • Media item
    • Comments: 0
    • Album: Use what I got...
  10. photo 1.JPG

    photo 1.JPG

    • devilsmoker
    • Media item
    • Comments: 0
    • Album: Use what I got...
  11. devilsmoker

    Use what I got...

    I got out the sledge and mason chisel. Turned out the top 4 inches was mortar with block scraps down another 5 inches. It went quick once i got a hole started. Felt like an archaeologist when I found an old shirt button in the rubble.. I was able to get it down 9 inches to where it felt...
  12. photo 4-1.JPG

    photo 4-1.JPG

    • devilsmoker
    • Media item
    • Comments: 0
    • Album: Use what I got...
  13. photo 3-1.JPG

    photo 3-1.JPG

    • devilsmoker
    • Media item
    • Comments: 0
    • Album: Use what I got...
  14. photo 5-1.JPG

    photo 5-1.JPG

    • devilsmoker
    • Media item
    • Comments: 0
    • Album: Use what I got...
  15. photo 2-1.JPG

    photo 2-1.JPG

    • devilsmoker
    • Media item
    • Comments: 0
    • Album: Use what I got...
  16. photo 1-1.JPG

    photo 1-1.JPG

    • devilsmoker
    • Media item
    • Comments: 0
    • Album: Use what I got...
  17. devilsmoker

    Use what I got...

    Thanks guys. I have read both of you builds. Very nice indeed.. I like the idea of getting the floor of the fire chamber lower. It looks like they filled from the face block back to the back wall with concrete. The hammer feels solid but maybe it's only filled one run with block under. I will...
  18. Use what I got...

    Use what I got...

  19. devilsmoker

    Use what I got...

    Hi all. I used this forum to build my first UDS years ago. Its been good to me but i might need another project. Stumbled upon the brick smoker section and a light bulb went off. I bought the house I'm in 6 years ago and have been struggling with what to do with the built in grill area. I have...
  20. photo 5.JPG

    photo 5.JPG

    • devilsmoker
    • Media item
    • Comments: 0
    • Album: Use what I got...
Top Bottom
Back
Clicky