Toggle sidebar

Search results

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. fordman

    mes 40 full chip pan

    Has anyone recently got a full chip pan out of masterbuilt for a 20070211 for free would like to get one. Was thinking since I use the amnps in mine was going to put some charcoal in it to add some flavor and would be easier in the full pan.
  2. fordman

    2012 Masterbuilt Smokers - NEW 30" & 40" Models!

    20070211 is a 40 ss front with window and black sides the 20070311 ss front with window and ss sides. Sorry these are the only two I know.
  3. fordman

    running temp probes gen 1 mes 40

    Yeah just wondering if there any other ways I planned on placing a 3" elbow over exhaust to help with the draft
  4. fordman

    running temp probes gen 1 mes 40

    Just picked up a new gen one mes 40 wondering how people run there temp probe wires other than the one already installed.
  5. fordman

    2012 MES 40 vs. Old Model MES 40

    Just picked up a MES40 off Amazon that sounds like it is new in opened box. Wondering what is the damentions of the bottom of the unit have a stand for my gosm gasser wondering how it will for on it.
  6. fordman

    2012 MES 40 vs. Old Model MES 40

    Well any updates looking to get a mes 40 only found one place online for 360.00 kinda of high vs the newer model. So hoping to get this figured out.
  7. fordman

    would this be worth it

    They have different generations of this model reviews of bad elements.
  8. fordman

    would this be worth it

    never mind
  9. fordman

    GOSM 3605G vs AMNPS HHEELLPP

    So what way would you go redo the door buy mounting the door hinge on top and take some of the bottom or put new holes in the side but as low as I can.
  10. fordman

    GOSM 3605G vs AMNPS HHEELLPP

    Don't know if the between hole is a big deal his one looks bigger. http://www.smokingmeatforums.com/t/122476/rear-fire-box-for-propane-smoker-no-more-opening-the-door-amnps-ready
  11. fordman

    GOSM 3605G vs AMNPS HHEELLPP

    Well fired up the welder and plugged the old side holes now might cut the door off and weld the hinge on the top and take an inch off the door.
  12. fordman

    GOSM 3605G vs AMNPS HHEELLPP

    Would think as long as it's as low as I can get it and seal up the upper side holes should be the same.
  13. fordman

    GOSM 3605G vs AMNPS HHEELLPP

    And I didn't cut down the size of opening between the box and the smoker. Now will new holes or one big hole on the side work as long as its at the lowest point I can get or do I need to redo my door somehow.
  14. fordman

    GOSM 3605G vs AMNPS HHEELLPP

    Well did a test run like this and wow what a difference door was open for a bit before I snapped pic so little on heavy side. But every time I would look had decent smoke. Now need to mod more.
  15. IMG_20130926_174130_983_zps065b71cf.jpg

    IMG_20130926_174130_983_zps065b71cf.jpg

    • fordman
    • Media item
    • Comments: 0
    • Album: GOSM 3605G vs AMNPS HHEELLPP
  16. IMG_20130926_174121_803_zpsbe1ab611.jpg

    IMG_20130926_174121_803_zpsbe1ab611.jpg

    • fordman
    • Media item
    • Comments: 0
    • Album: GOSM 3605G vs AMNPS HHEELLPP
  17. fordman

    GOSM 3605G vs AMNPS HHEELLPP

    Can't see pics sorry could you email them
  18. fordman

    GOSM 3605G vs AMNPS HHEELLPP

    If the two holes were acting like a exhaust wouldn't they be having smoke go out of they? Whould it be better to have holes on the bottom under amnps?
  19. fordman

    GOSM 3605G vs AMNPS HHEELLPP

    If I could cold smoke everything I would be set. Took this stove cover and placed it over burner and have great smoke with the two holes in side of added box.
  20. IMG_20130925_181620_819_zpsb9feefb7.jpg

    IMG_20130925_181620_819_zpsb9feefb7.jpg

    • fordman
    • Media item
    • Comments: 0
    • Album: GOSM 3605G vs AMNPS HHEELLPP
Top Bottom
Back
Clicky