Toggle sidebar

Search results

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. L

    Howdy from Maine!!!

    Welcome from Bridgton.
  2. L

    Propane Smoker Help

    A needle valve will work on any gas burner. Simply install it in the gas line, turn on the valve on the smoker on to high and control the flame with the needle valve. It's that simple.
  3. L

    Propane Smoker Help

    You don't need an expensive control on a gas burner. Simply add a needle valve in the gas line. Do a search above for lots of needle valve installations. good luck
  4. L

    Chef in Maine

    Welcome to the forum from Lamar in Bridgton. There is a large apple operation here in Bridgton that usually has a few crates of apple limbs sitting around. Name if it is Five Fields. Operator is Tom Gyger, 647-2425.
  5. L

    Holy Grail cooking temp (New to smoking, please read)

    Very well stated JJ. I wish there was some way to have your post a "required reading" and possibly put the subject to rest once and for all. There has been too many arguments on the subject down through the years. Keep up the good work, JJ. Lamar
  6. L

    Newbie !!!!!!!!!!!!!!

    Welcome to the forum. Glad to see another ham on board. Lamar K4ZTT and Sue....XYL W4ZTT
  7. L

    Been gone a while, but back in the Qzone now at around ¾ speed.

    Hey Charlie.......glad to see you back. Hope your aches and pains are gone for good. Lamar
  8. L

    Initial Setup and Using the Masterbuilt Vertical Propane Smoker

    Here is what I did for a wind shield. Simple to do with any kind of light metal.
  9. Initial Setup and Using the Masterbuilt Vertical Propane Smoker

    Initial Setup and Using the Masterbuilt Vertical Propane Smoker

    • lamar
    • Album
    • Comments: 0
  10. wind shield.jpg

    wind shield.jpg

    • lamar
    • Media item
    • Comments: 0
    • Album: Initial Setup and Using the Masterbuilt Vertical Propane Smoker
  11. L

    Masterbuilt 30" 2 Door

    The metal does not have to be heavy gauge. Any will do. Cheap flashing at a big box store will work fine and easy to cut with a pair of metal shears. I used self tapping metal screws to install the plates. Mine are light weight aluminum simply because I had it.
  12. L

    New Member: ivegotmoxie

    Welcome from Bridgton JD. Glad to have you aboard. If you use the search above, you can find out about anything you would want to know about this hobby (habit). It is addictive.
  13. L

    Temp probe question

    Mike5051 is spot on.
  14. L

    Started at 7AM, will my butt be done by 3PM?

    Hey Cliff..........how about sending those prices down to southern Maine!!
  15. L

    Newbie from Maine

    Welcome to the forum from Bridgton. A fine place to hang your hat. What part of Maine?: :welcome1:
  16. L

    Needle Valve Question

    Another happy gas smoker. The needle valve really works. Fuzzy, the one pictured above will do just what you need. The needle valve always goes between the tank regulator and the burner in the low pressure line.
  17. L

    Charbroil 600 Gasser / Needle Valve

    I see no reason to replace the hose that came with the smoker unless it is damaged. It seems some folks tend to go overboard thinking safety. Nothing wrong with that way of thinking.
  18. L

    Charbroil 600 Gasser / Needle Valve

    The needle valve can go anywhere between the regulator and burner. Just turn on the built in gas valve to high and control the flame with the needle valve. You will be surprised how well you can regulate the CC temperature. Mine will stay within 2-3 degrees all day. good luck
  19. L

    I just ordered a Lang 36 UPDATE: It's seasoned & ready to go! Photo's on post #81

    Hey Al..........just think about how much meat you can smoke in the first six months while you stand 24-7 guard duty with your shotgun over the new toy!!!
  20. L

    Smoker duration issue

    Have you checked the thermometers in boiling water? What temp are you showing close to the meat?
View older results
Top Bottom
Back
Clicky