Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
One more note. Make a mental note which way the grain of the meat is going on your tip so when it's done you can slice across the grain. Some make a score mark on each end before cooking for later reference. Tri tip has the grain going in two different directions from each point.
I concur with the above poster but I take mine off at 125 and sear on a screaming hot grill for a minute or two on each side. This is called reverse sear and it works really well with this cut of beef. Make sure you let it rest for a half hour before slicing. I have used sirloin tip with great...
I have never tried burnt ends with chuck but let us know how it turned out. Pulled Beef cooked long enough is every bit as good or better than the finest pulled pork.
I love chuck roast and smoke it all the time. I smoke at 225 and foil at 165 or 170 internal. Chuck is even tougher than the toughest pork butt so you will want to take it to at least 205 nice and slow for pulling with a good long rest double wrapped with foil and a little liquid. Actually with...
If you can find a drum with the removable lid you will be better off unless you already have a weber kettle lid laying around. The stock lid with the 2 inch and 1 inch bung holes is perfect. If not you can cut the lid off down the side a couple of inches and use a sleeve inside the drum for it...
Short answer is yes. The main thing is to drill your intake holes before you do the burn out for good air flow. 2 pallets is perfect for the burn out and pallet wood burns clean. It does not matter what was in the drum as you will be taking it down to bare metal with the burn anyway. I used a...
I get my Burger from the butcher twice a year when dad and I split a steer. Mom, likes it lean so it's like 90/10. It's a pain to work with so I add a little non fat powdered milk and ground bacon and an egg and a little worchester sauce to it and mix it up in my stand mixer just enough but not...
You would want to do some mods to that smoker to get it to perform right. A lot of folks seem to have a hard time keeping the temp. down on those. So you you would want to get a needle valve installed for fine tuning the gas flow. The next thing I see people having problems with is the wood tray...
Are you confused yet? I am! I'm with the low and slow crowd. 225 degrees, two hours per pound and two hour rest double wrapped in foil with some apple juice or PBR and into the cooler for the rest.
This does it all and no mishaps have happened yet. I don't know how one could. Pretty darn solid unit.
That weber gasser is 31 years old and still works like a champ. Do you really want to get rid of yours? I love my Kettle. It is a Performer 22 inch and will smoke and...