Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
I usually add my ECA and more water right before stuffing. By the time I mix in the ECA (by hand of course), it's fairly loose. I've stuffed in a 13mm horn this way with no issues (manual stuffer).
I normally stuff with a 5lb stuffer (the good ole' Kitchener I've had for 20 years or more)...
Of all the "Italian" sausage recipes I've tried over the years, this one is my favorite and now my go-to. Do not omit the anise seeds, it is essential to the flavor. Also if you lightly toast the fennel seeds, it brings the essential oils to the surface (lightly is key).
2.2 lbs. well‐fatted...
I must confess, I have not had the occasion lately to make these (yet). I even stooped to buying some Roger Wood Red Links the other day (still good, but not homemade).
I'm not a huge fan of milk powder as a binder, and lean towards the commercial binders like Butcher & Packer #414 or...
There is a YouTube video and recipe for "Red Hots" and they have the correct look. I have *NOT* tried the recipe yet tough. These were featured in the "2 Guys and a Cooler" Sausage Month for 2023. I would probably leave out the Carolina Reaper powder if I made this recipe.
I've attached the...
I did not see this, but how many watts are your 2 heating elements (how many each)? That is the load that determines what amperage will actually be used and what wire gauge is needed along with what fusing/breaker for safety.
Also I did not see a heat sink for the SSR in your photo. Do you...
We used to have a "Red Hot" sausage like what this thread is talking about. It is not the same as a "Texas Hot Link" in texture, taste or appearance. It's more of a "southern" thing IMO.
The staff kitchen at the company where I worked in the 70's made sausage biscuits with them. Split the red...
Also, after removing the stock water pan, in my PB5 I get good results by using one of the grates to hold the disposable foil pan, but move it up to the 3rd set of holes from the bottom. This gives a little more air volume for the fire pot to heat and seems to hold the swings down a little bit...
IF you don't want to pay the $61 for a Searzall, get a Benzomatic "flame spreader". Sometimes hard to find, but it just snaps on the end of a regular torch nozzle. Of make one from sheet metal like this guy did.
Home Made "Flame Spreader"
I have the #12 Big Bite and love it. Yes it is a heavy beast, but no issues with it so far. I upgraded from the #12 Kitchener so I had extra plates and other accessories in #12 size. I got lucky and ended up snagging one for about $329 on Amazon, sold by Amazon. It was the lowest price I had...
I have another brand pellet grill that I'm repairing for my daughter to use, but yes, covering the grease diverter with foil will go a long way towards keeping the grill clean. You can run it without foil, but cleanup will be much harder. Also you can always tear/cut the foil for an opening...
Rick, is that the whole ham from the package you bought in the photo? It's just the 2 of us now and I've not done a spiral ham recently as it's just too much meat for 2 people. Your small one looked like a good compromise. I did not know Sam's had the smaller ones (or is that just part of...
Also pretty much every part on a pellet smoker or grill can be replaced by a somewhat handy user/owner. There are even companies who market digital PID controllers to replace the stock ones. Other than the controller, it's basically 2 motors and a small electric heating element.
Also it's...
Last time I ordered from them, I ended up getting them for about $7.89 a bag shipped (stacked discounts worked that time - which was unusual). They shipped me about 1/3 of a pallet (20 bags), each 20lb bag in a separate box via FedEx. I'm sure my FedEx man had some choice words for me that day...
Just the initial burn in as described in the manual. You want to run it at a high temp for a while to make sure all the oils and stuff from the manufacturing process are burned off.
When I did my burn in, after I was satisfied it was done, I tossed some sausage on and dropped the temp down...
I know the Lumberjack brand version has good reviews, I have seen a couple of videos on the PitBoss brand and they say the flavor is like charcoal thin blue smoke. I'm thinking of picking up some of the $9 bags at Wally World to try as the Lumberjacks are $15 near me. I have about a 1/3 of a...