Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
This would be an ideal time to convert over to a PID controller. Makes the MES a much better smoker.
Nothing more than a fairly simple rewire.
https://www.smokingmeatforums.com/threads/mes-rewire-simple-guide-no-back-removal-needed.267069/...
...MES model 20070411 that wouldn't control heat. I assumed the relay on the power board was stuck on so I decided to do the rewire and connect to a PID controller. The controller that I am using is something that I built using a Athena controller and a 25 amp SSR. I use this controller on...
...? It can give you a good starting point, but from there on if it still overshoots you'll need to do some adjustments. Just to let you know, the PID settings on different brands of PID controllers are not the same. Especially the P setting so read the manual or find a group that's familiar...
...creosote removal an essential step. Cold smokes work fine since the temperatures are low and steady. Your setup could benefit from better temperature control a PID controller might help regulate the heat more consistently, and separating the wood from the main burner can prevent overly hot...
And these temps are verified by an independent therm for a sustained amount of time?At 375℉ I find it hard to believe your MES could hold that temp without cooking itself.Verify this with a working independent therm and I'll be onboard.
Why?The switches on both my units have done their job...
...MES 40 (purchased in 2012, died in May of last year), and guiding me through the process. I had many questions that could probably be labeled "stupid", but he never seemed to get annoyed, and usually responded promptly. Years ago when I joined this forum, it was because of members who were...
...and chips has been resolved by most via the mailbox mode which allows a full tray of pellets thus eliminating the PITA chip feeding. Add a good PID to one and you'll end up with a pretty darn good smoker. Looking at pellet units, if I were in the market I'd spend time reviewing MAK and Lone...
So, so true, Pop's is already home, it absolutely blows me away that they can remove a kidney on an 85-year-old man and send him home the next day expecting him to get around the house ok. I just got off the phone with Mom, and she said her and my aunt definitely had fun getting him up and down...
Hi there and welcome!
It sounds like troubleshooting time.
Have you simply plugged into the wall, by itself (nothing else plugged in) the new cord that goes directly to the heating element?
This would eliminate everything else and the element should just heat up on it's own uncontrolled.
If...
...that you mention. The "set it and forget it" aspect is great. Another idea would be an electric smoker like an MES (Masterbuilt) with an Auber PID control as a replacement for the electronics that are notoriously terrible. I have one for sausage making that requires very low temps and really...
...on the wall is the goto rack. It's the food nearest to it on a vertical smoker. Put your food there to manage the temp where your food is. A PID sensor dangling down the top vent hanging next to your food 2" off the wall and no closer than 2" from your food tells the temp of the area of...
...a new 1650W burner I had. Added a fan I already had from a different build. Added a new exhaust and intake for my pellet tube. Temp prob port was added and it will all be ran from my pid. (Still brainstorming ways to mount the pid to the smoker) Will do some testing today if it ever stops...