Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
The solenoid is on off and controlled by a pid. The holes are 1/2” spaced at 3” right now. If too restrictive can make some/all bigger. Wont know until run it.
Probably better to upgrade to a PID temperature controller instead of fighting with Masterbuilt.
Start here and be warned for a 2 hour read
https://www.smokingmeatforums.com/threads/mes-rewire-simple-guide-no-back-removal-needed.267069/
Hi there and welcome.
Yeah @normanaj is completely correct!
The PID would be cutting power Off to the entire MES. That means no power to the controller and heating element so it is effectively unplugging the MES.
Then when it turns power back on, I believe the MES is no longer set to be "on"...
Gentlemen. . .My apologies for the delay. . .Life kind of got in the way.
Thanks to the 15 of you who were willing to take the PID Controller off my hands.
With no further ado...The winner is, @jcam222 Congratulations! I hope it doesn't confuse you as much as it has me.
Thanks again guys...
...both in excellent shape and perfect working order. The manual control on the smoker has been bypassed so that it is controlled by the Auber PID Smoker is also well seasoned.
Smoker has 1" insulated walls and is all stainless other than the wheels and it can be used all year long. I will put...
Built a DIY PID with an Inkbird ITC-106vh controller.
Wondering if anybody has used this on a Masterbuilt 40.
I run a AMNPS tray in a mailbox mod .
Looking for the PID settings that worked for you. TIA
You can hook a pid up to control the gas flow too. I am including a thermo couple shutoff on mine in case the flame goes out for some reason. I need to finish mine up, caught a bad case of lazy and rather be out on the lake.
...give your smoker element and wire a longer life.
Decide on the highest temp' you want to run your smoker at once you get it going. Look at your PID manual and find a place that lets you set the max % output,0-100%. Do a test run setting the max% output to 75%,( not the same as max temp'), Set...
Well, when something finally fails and you're ready to buy a new one, do yourself a favor and buy the parts for the old one. The new ones are not nearly as nice as the old ones.
...that are easy to do that can eliminate all the negative issues and make the MES an incredible electric smoker, those being adding an aftermarket PID controller that will hold temps +/- a few degrees of set temp. The other mod is the "mailbox mod" which allows for use of a pellet tube/tray...
...will want to verify the temps in the cabinet... If you have a remote/wireless thermometer that you can use to track the temps in the cabinet... And then compare them with what the controller is saying they are... This is why people will do the PID mod as the controller is hardly ever...
I use electric with a PID controller... and a smoke tube... I like electric as you can set it up to ramp temps up automatically.. With a firebox you will almost have to sit there and babysit it the full time...
I can start a batch when I go to bed and it will be done in the morning when I get...
Other than the legs it's the same as my 30.
If the wiring is the same then adding a PID (if the OP chooses to do so) should be nothing more than switching the wiring harnesses.
...burner does make meat better tasting than my pellet smoker but not by much if you use the right pellets. Few can tell the difference.
When PID controllers came along, the tight temperature control did not simulate the real wood burning smoker cycle of adding wood. So they came up with...
...Had kept it in the garage, and it worked like a beauty the last time I used it. Put it in the truck, drove it 20 minutes, unloaded it and....PID was out. Something like a $400 replacement part, and I felt like a @$$.
If they are cool with you bringing some pellets and firing it up, I think...