Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Recent content by madtownmonkey
Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
I definitely used your PID settings and they held the temp really well. The iphone interface is pretty nice the heatermeter controller is the bomb and works really well. I had a probe in each of the briskets and everything just worked. Maybe next time I'll use a port forwarding service so I can...
So I'll try toggle some information about how I added heater meter control to my MES 40.
I ordered some five pin connectors from amazon.
happily these turned out to exactly match the connectors used to connect the bluetooth controller to the MES.
I also ordered an adjustable voltage divider...
My setup seems to work. It plugs between the on board control panel and the smoker inputs. I tested it this morning and I could control the temperature. I will put up photos and some links to the connectors and the other parts I used.
In all I think I spent around $20 on the connectors and the...
I think I have identified the ground and signal wire for the relay. It seems it's a 3.3V signal. I have ordered some parts from Amazon, which I hope will allow me to do a completely removable install (I will have to cut some holes in the plastic front plate. But that part can be purchased from...