Toggle sidebar

Recent content by chipmunk

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. chipmunk

    another first fridge build

    ​Here you can see the cord from the element exiting the back of the smoker which connects to the controller ​This pic shows the cover over the flange penetration that's used for the element cord that goes out of the smoker which connects to the controller ​Here you can see the element...
  2. elec smoker#2.jpg

    elec smoker#2.jpg

    • chipmunk
    • Media item
    • Comments: 0
    • Album: another first fridge build
  3. elec smoker#6.jpg

    elec smoker#6.jpg

    • chipmunk
    • Media item
    • Comments: 0
    • Album: another first fridge build
  4. elec smoker#9.jpg

    elec smoker#9.jpg

    • chipmunk
    • Media item
    • Comments: 0
    • Album: another first fridge build
  5. elec smoker#8.jpg

    elec smoker#8.jpg

    • chipmunk
    • Media item
    • Comments: 0
    • Album: another first fridge build
  6. chipmunk

    another first fridge build

    ​this is the heat shield installed over the electric element                                                                                                                                                                                                                           sorry for the...
  7. chipmunk

    another first fridge build

    ​this is the heat shield installed over the electric element
  8. chipmunk

    another first fridge build

    ​this is the heat shield installed over the electric element
  9. elec smoker #1.jpg

    elec smoker #1.jpg

    • chipmunk
    • Media item
    • Comments: 0
    • Album: another first fridge build
  10. chipmunk

    another first fridge build

    this is how I run the controller, when I use it as a electric smoker
  11. elec smoker#5.jpg

    elec smoker#5.jpg

    • chipmunk
    • Media item
    • Comments: 0
    • Album: another first fridge build
  12. chipmunk

    another first fridge build

    Well, truth be told, painting the beast was defiantly spendy, but I was fortunate enough to get some of the paint and primer from my eldest brother who had been given some of what I used .The black base was a straight enamel, while the primer, the carrier for the metal flake, and the clear used...
  13. chipmunk

    another first fridge build

     the inner flange was a piece of pipe that I turned down on a lathe, then welded a flange onto that to be able to mount it from the inside. The reason that I turned down the pipe was to facilitate the smoke stack being able to slide onto it from the outside, with a nice snug fit, the tubing I...
  14. chipmunk

    another first fridge build

    In this shot of the inside of the beast, you would have to look close, but I have a cover over the heat shield over the burner, it's fabbed out of a 1/4" piece of S.S. plate that also acts as a support for a 1500 electric element that I use for ultra low temp smokes, using a auberins  controller...
  15. another first fridge build

    another first fridge build

    • chipmunk
    • Album
    • Comments: 0
See more
Top Bottom
Back
Clicky