Recent content by 4a616b65

So had another day trying the smoker out, it went terribly, felt very defeated by the end of the day. Set up around 7am, put a load of lump coal in and some bark kindling then some oak logs and the fire was roaring in no time left it to die down and cool off as it was over 300deg. Started off...

Bit of an update, I got everything welded up and useable, there still some finishing off to do (shelf, top grill, close up the gaps on the lid and firebox door) I had a fire in it on Saturday afternoon and oiled it, then cooked beer can chicken on the night it turned out really tasty. Whilst...

I’ve made the cut for the throat at 5” by time I have the 5mm steel from fire box should be somewhere near. Next step is to tack the firebox into shape and weld the firebox in.

So I happened to go on the laptop today on the website for the first time, turns out when I had been looking on my mobile it shows the page totally different, no strike through 0.017 and no old number next to it. So anyway I took the plunge still not sure my volume calcs were right so if...

Yes sorry should have stated the numbers stated above are the calcs from that guide just not sure if I’ve done them correctly or like I said the throat is correct

Hi, just joined and looking for a little advice on my numbers. I’ve been at the same point for weeks with my builds as I’ve put off making a cut until I’m certain the numbers are right. Decided to just ask and hopefully get a second opinion before I take the plunge. So I work in metric...