My Labor Day Throw-down Entry....

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

indaswamp

Epic Pitmaster
Original poster
Staff member
Moderator
OTBS Member
Apr 27, 2017
15,169
13,627
South Louisiana-Yes, it is HOT
I made a Venison and Wild Hog Braciole fattie with Wild Hog Cappicola.

First, I made the sauce and let it simmer for a while to get it thick like a paste so it would stay put in the fattie and not squeeze out too bad.
IMG_20230831_130622.jpg


4# of 50/50 Venison and beef. I used my basic meatball recipe but left out the parmesan cheese. spread that out into a large sheet pan. Put that in the fridge to chill and firm up.
IMG_20230831_133709.jpg


Sliced and diced the wild hog Capicola. I used both. 1/2# diced in the stuffing, and 1/2# sliced as one of the layers.
IMG_20230831_143300.jpg


Spread the thinnly sliced Capicola out on plastic wrap to make a layer.
IMG_20230831_144511.jpg


Now Assembly:

Made a bacon weave with 2# of bacon. Then flipped the meat out on the bacon from the sheet pan.
IMG_20230831_151138.jpg


Thin layer of the thick tomato sauce...
IMG_20230831_151313.jpg


2# Fresh mozzarella....
IMG_20230831_151551.jpg


Then flipped the capicola layer onto the cheese and sauce. That was interesting...had to use a small piece of foam board I had on hand...
IMG_20230831_151627.jpg


Remove the saran wrap...
IMG_20230831_151635.jpg

IMG_20230831_151715.jpg


Next comes the braciole stuffing and the boiled egg slices...
IMG_20230831_152541.jpg


And now it is time to roll. That posed a big problem. I had never made a fattie that large and really did not think it through. Would have taken at least 3 people to do it right. So I relented and reluctantly decided it would be best to split it in half and make two smaller more manageable fatties.
IMG_20230831_163650.jpg

Had to use extra bacon to repair the weave where I cut it, but it came out ok. I left them on the sheet pans to make it easier to pull them off. In hindsight, I could have rolled them out on the 1/4" mesh i have that I use for jerky.

Getting some color...
IMG_20230831_174852.jpg


And, two happy fatties....
IMG_20230831_192917.jpg

IMG_20230831_192953.jpg

IMG_20230831_192923.jpg


The plate:
IMG_20230831_222753.jpg
 
Last edited:
I made a Venison and Wild Hog Braciole fattie with Wild Hog Cappicola.

First, I made the sauce and let it simmer for a while to get it thick like a paste so it would stay put in the fattie and not squeeze out too bad.
View attachment 677205

4# of 50/50 Venison and beef. I used my basic meatball recipe but left out the parmesan cheese. spread that out into a large sheet pan. Put that in the fridge to chill and firm up.
View attachment 677204

Sliced and diced the wild hog Capicola. I used both. 1/2# diced in the stuffing, and 1/2# sliced as one of the layers.
View attachment 677201

Spread the thinnly sliced Capicola out on plastic wrap to make a layer.
View attachment 677200

Now Assembly:

Made a bacon weave with 2# of bacon. Then flipped the meat out on the bacon from the sheet pan.
View attachment 677203

Thin layer of the thick tomato sauce...
View attachment 677202

2# Fresh mozzarella....
View attachment 677211

Then flipped the capicola layer onto the cheese and sauce. That was interesting...had to use a small piece of foam board I had on hand...
View attachment 677199

Remove the saran wrap...
View attachment 677210
View attachment 677198

Next comes the braciole stuffing and the boiled egg slices...
View attachment 677207

And now it is time to roll. That posed a big problem. I had never made a fattie that large and really did not think it through. Would have taken at least 3 people to do it right. So I relented and reluctantly decided it would be best to split it in half and make two smaller more manageable fatties.
View attachment 677206
Had to use extra bacon to repair the weave where I cut it, but it came out ok. I left them on the sheet pans to make it easier to pull them off. In hindsight, I could have rolled them out on the 1/4" mesh i have that I use for jerky.

Getting some color...
View attachment 677209

And, two happy fatties....
View attachment 677214
View attachment 677213
View attachment 677208

The plate:
View attachment 677212

Each fattie weighed about 5#. Huge for a fattie!
You Sir are impressive! Absolutely beautiful!
 
I made a Venison and Wild Hog Braciole fattie with Wild Hog Cappicola.

First, I made the sauce and let it simmer for a while to get it thick like a paste so it would stay put in the fattie and not squeeze out too bad.
View attachment 677205

4# of 50/50 Venison and beef. I used my basic meatball recipe but left out the parmesan cheese. spread that out into a large sheet pan. Put that in the fridge to chill and firm up.
View attachment 677204

Sliced and diced the wild hog Capicola. I used both. 1/2# diced in the stuffing, and 1/2# sliced as one of the layers.
View attachment 677201

Spread the thinnly sliced Capicola out on plastic wrap to make a layer.
View attachment 677200

Now Assembly:

Made a bacon weave with 2# of bacon. Then flipped the meat out on the bacon from the sheet pan.
View attachment 677203

Thin layer of the thick tomato sauce...
View attachment 677202

2# Fresh mozzarella....
View attachment 677211

Then flipped the capicola layer onto the cheese and sauce. That was interesting...had to use a small piece of foam board I had on hand...
View attachment 677199

Remove the saran wrap...
View attachment 677210
View attachment 677198

Next comes the braciole stuffing and the boiled egg slices...
View attachment 677207

And now it is time to roll. That posed a big problem. I had never made a fattie that large and really did not think it through. Would have taken at least 3 people to do it right. So I relented and reluctantly decided it would be best to split it in half and make two smaller more manageable fatties.
View attachment 677206
Had to use extra bacon to repair the weave where I cut it, but it came out ok. I left them on the sheet pans to make it easier to pull them off. In hindsight, I could have rolled them out on the 1/4" mesh i have that I use for jerky.

Getting some color...
View attachment 677209

And, two happy fatties....
View attachment 677214
View attachment 677213
View attachment 677208

The plate:
View attachment 677212
JTC: I love a fatty from time to time, but dayum, that's awesome.
 
That's one heck of a fatty Keith!!! I would have loved to have seen that monster rolled at full size. Congratulations on the win.

Point for sure
Chris
 
  • Like
Reactions: Schwarzwald Metzger
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky