- Mar 7, 2023
- 36
- 41
So I finally got my smoker seasoned and smoked my first 2 racks of ribs. Sorry if this post is too long. I did not get pictures but do have questions and a nice new way to eat leftover ribs that made the hubby go nuts. I did them 2 ways because my BIL said I needed to use that smoker as a stick burner and stay away from charcoal. So we wanted to see what we liked and what the smoker liked.
The first rack was trimmed and seasoned. Water pan on the rack beneath the ribs. The smoker was set up with chunk charcoal (minion style) and seasoned hickory was added as the coals got hot. When additional fuel was needed hickory was added. Temp ranged from 200-250 during the cook period. Ribs hit done temp, were removed wrapped and rested while the 2nd rack was started. By this time the charcoal was spent and wood embers remained. So this rack was cooked with only hickory. Same process though it was a little harder to control temp surges with just the wood and it seemed the smoker wanted more air with the wood vs charcoal and wood?
So both batches were pretty good. I was very happy for our first run. But the second batch was far smokier (almost too strong) than the first. It makes sense to me that they would be since more smoking wood was used but those were the smokiest ribs I have ever tasted I think. I deliberately avoided mixing oak because there is a BBQ place here that uses oak and there BBQ is delish but does not agree with me (theory=oak).
Now for the questions.
1. Was the super smokiness because I used only hickory or is this normal for stick burners? Any other possible causes/solutions?
2. I was using a 4 probe Thermapro thermometer and had a temp difference between 1st and second shelf (12" apart) of usually about 25 degrees. when the 2 temps were right together fuel was running low. It seems like this would be normal since heat rises but want to confirm that and then why would they even out when fuel was low?
3. The water pan was a normal disposable aluminum pan placed in on the shelf below the ribs (approx 5 inches above the floor). I started with about 1 1/2 inches of water in the pan. I had a pan full of water and drippings when both racks were finished (over 7 hours later). I expected to have to add water. Is that normal?
The first rack was trimmed and seasoned. Water pan on the rack beneath the ribs. The smoker was set up with chunk charcoal (minion style) and seasoned hickory was added as the coals got hot. When additional fuel was needed hickory was added. Temp ranged from 200-250 during the cook period. Ribs hit done temp, were removed wrapped and rested while the 2nd rack was started. By this time the charcoal was spent and wood embers remained. So this rack was cooked with only hickory. Same process though it was a little harder to control temp surges with just the wood and it seemed the smoker wanted more air with the wood vs charcoal and wood?
So both batches were pretty good. I was very happy for our first run. But the second batch was far smokier (almost too strong) than the first. It makes sense to me that they would be since more smoking wood was used but those were the smokiest ribs I have ever tasted I think. I deliberately avoided mixing oak because there is a BBQ place here that uses oak and there BBQ is delish but does not agree with me (theory=oak).
Now for the questions.
1. Was the super smokiness because I used only hickory or is this normal for stick burners? Any other possible causes/solutions?
2. I was using a 4 probe Thermapro thermometer and had a temp difference between 1st and second shelf (12" apart) of usually about 25 degrees. when the 2 temps were right together fuel was running low. It seems like this would be normal since heat rises but want to confirm that and then why would they even out when fuel was low?
3. The water pan was a normal disposable aluminum pan placed in on the shelf below the ribs (approx 5 inches above the floor). I started with about 1 1/2 inches of water in the pan. I had a pan full of water and drippings when both racks were finished (over 7 hours later). I expected to have to add water. Is that normal?