BGKYSmoker
Nepas OTBS #242
Original poster
Staff member
Moderator
OTBS Member
★ Lifetime Premier ★
Group Lead
Not waiting till Christmas...HA
Here are a few things i did to mine.
Applying braided 1000* heat seal around the burner box.
Sealed good
Going to take this apart later, install and elbow and use an adjustable regulator.
I did the doors the same way with the seal.
Paper on the inside just in case i get a drip.
I put the handles on and have a plastic bag over the door openings so i can make the seal tight, will remove the bag tomorrow.
I also added a new door thermo dial, way better than the original POJ
BBL
Here are a few things i did to mine.
Applying braided 1000* heat seal around the burner box.
Sealed good
Going to take this apart later, install and elbow and use an adjustable regulator.
I did the doors the same way with the seal.
Paper on the inside just in case i get a drip.
I put the handles on and have a plastic bag over the door openings so i can make the seal tight, will remove the bag tomorrow.
I also added a new door thermo dial, way better than the original POJ
BBL