BGKYSmoker
Nepas OTBS #242
Original poster
Staff member
Moderator
OTBS Member
★ Lifetime Premier ★
Group Lead
This is not my pic, found online.
Going to go with this type but with not as many bolts in the door support. From the looks of the bolts they are not SS. My hanger supports will have 2" holes drilled and they will be ripped so I have the same on both sides. My vents will be 3d printed, fresh air intake on the bottom and a 4" stove pipe with damper and cap for the outflow.
For the wood hope I have enough pallets, if not going with tongue & groove.
Going to go with this type but with not as many bolts in the door support. From the looks of the bolts they are not SS. My hanger supports will have 2" holes drilled and they will be ripped so I have the same on both sides. My vents will be 3d printed, fresh air intake on the bottom and a 4" stove pipe with damper and cap for the outflow.
For the wood hope I have enough pallets, if not going with tongue & groove.