or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › Reverse Flow › Cutting a rope gasket...
New Posts  All Forums:Forum Nav:

Cutting a rope gasket...

post #1 of 5
Thread Starter 
OK folks, help a brother out. Picked up 10 foot of rope gasket for the FB door today. Going to need to cut it down some. How does one go about trimming it without it fraying? Next question....if fraying is un-avoidable what is done on the ends to minimize it?
post #2 of 5
Burn the ends with a flame. Match / lighter
post #3 of 5
Thread Starter 
Quote:
Originally Posted by c farmer View Post

Burn the ends with a flame. Match / lighter
Should I add just a bit in length and let it burn til it is good and tight on the ends?
post #4 of 5
You can add some. It won't take much.

Burn the end and while still hot smush the end some
post #5 of 5
Thread Starter 
Quote:
Originally Posted by c farmer View Post

You can add some. It won't take much.

Burn the end and while still hot smush the end some
Got it...Thanks
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Reverse Flow
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › Reverse Flow › Cutting a rope gasket...